Electronics Forum | Tue Jun 19 11:28:10 EDT 2007 | kpm135
I am fairly new to the MYData machine. The TP11 we have just started generating the following error: W-MIPR-20:System voltage BATTERY measured 14.59V (outside limits). After talking with the operators and reading the manual I believe the problem may
Electronics Forum | Fri Sep 23 06:42:08 EDT 2005 | lloyd
The only issues I have had in the past with the shuttle are 1. The transport conveyor into the machine was not aligned correctly causing pickup issue from the belt. 2. Operators not correctly loading parts in trays or updating the qty's, this meant
Electronics Forum | Fri Apr 07 09:26:36 EDT 2006 | engguy
This is common with older Fujis. The machine is trying to download production data to the host(MCS?) If the cable is not connected or if the MCS is off, the machine will randomly freeze at the end of prod. Either solve those issues or change the m
Electronics Forum | Wed Feb 12 14:14:42 EST 2020 | alvarez94
I am running a MYDATA MY19 machine.the problem is that the first 2 hours after turning on the machine it does not work throwing the following error: "transducers do not agree". After approximately 1 or 2 hours the machine starts working normally. T
Electronics Forum | Wed Feb 12 15:11:29 EST 2020 | alvarez94
I was consulting the manual of the machine and to measure the tension of the x belt I need a frequency counter and two prisms but I don't have these tools, is there any other way to measure the tension?
Electronics Forum | Fri May 11 11:18:16 EDT 2007 | rgduval
Their response time here has been excellent. Then again, their main US office is only an hour away from us, so, that may skew my opinion of their response time. Cost is average. Around $120/hour, plus travel and parts. Registering is an issue. T
Electronics Forum | Tue Jan 04 13:00:07 EST 2011 | bk
The only x fan i can think of would be the x belt motor fan which is on the back of the black box sticking out of the back of the machine. If it's a heat issue then first thing to do is replace the 2 filters behind the 2 vented covers located on the
Electronics Forum | Thu Mar 22 09:49:16 EDT 2007 | Manyhatz
You shouldn't have any problem with the SM320 doing what you're asking above. In fact I think it will do it quite better. We have a two machine TP-11 Hydra line and a two machine SM320 line and I can tell you one SM320 can get the job done better.
Electronics Forum | Thu Mar 26 11:29:31 EDT 2009 | cyber_wolf
I talked to Mydata service (briefly) 3 times. Halfway through the 3rd call it was suggested to me that we set up a service call. Times being what they are, we are not willing to go that route yet. Thankfully we are not in dire need of this machine ri
| 1 |
