Electronics Forum | Wed Jul 13 08:42:02 EDT 2005 | mikeattekfab
I am looking for an additional Tray wagon for our Mydata machines, anyone have a working one they do not need? Please let me know. Mike
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Tue Feb 03 12:39:16 EST 2009 | markhoch
Not sure what your job quantity is, or how many total parts you have to place, but we've had similar issues in the past trying to place domed LEDs. We had better luck cutting the tape into 25 or 50 piece strips and using double-sided tape to put the
Electronics Forum | Tue Jan 17 16:12:39 EST 2006 | ronhammer
Does anyone have any experience with a MyData Tray Wagon Magazine (TWM)? If so what do you do behind it for a conveyer? We received a TWM to test and it will not work with our conveyor system. MyData said to change to a different set of adjusting hol
Electronics Forum | Wed Jan 18 07:48:12 EST 2006 | avalancher
Hi Ron, The Tray Wagon magazine is designed to go on all the MYDATA machine types, and equipped options. When you have a conveyor system, you do need to mount it so that when the tray wagon goes all the way to the back, it does not hit the exte
Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf
We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma
Electronics Forum | Sun Apr 07 00:45:21 EDT 2019 | d_nguyen2018
Hi, Can you show me how to set up tray table? I have 1 x 10 pockets tape with 10 PQFPs. I went into Magazines then selected Tray Wagon. I did first and last part on the 1 x 10 tape pockets but it did not work. I was told that I must set up the tray
Electronics Forum | Tue Apr 09 21:57:42 EDT 2019 | alexvolovich
If you were able to do a first/last part, then your tray wagon is set-up. You need to go to Tray Types and program the tray that will match the piece of tape you have. Then you should be able to add your component to the tray wagon.
Electronics Forum | Tue Jun 24 11:58:55 EDT 2014 | markhoch
We had both a MY15 and a TP11 both with tray wagons and we taped strips to the tray wagon all the time with great success. we used double sided tape, sometimes with magnets, and then created "trays" as if the tape strip was a matrix tray. (1 x 10,15
Electronics Forum | Tue Jun 24 14:00:58 EDT 2014 | joekirin
We built a tray that accepts tape. It is made out of a waffle tray and board breakaways. It works very well. We use magnets to mount it on our Y-Wagon teaching it as a tray.