Electronics Forum | Mon Jun 06 10:43:23 EDT 2005 | ratsalad
Hello there, We have a Panasonic MVIIC with a bad PCB camera. The amp is fine, we tested that by swapping it with the small and large parts camera. When the machine is shut down for a while and we bring it back up, it takes hours for the PCB camer
Electronics Forum | Tue Mar 13 07:56:19 EDT 2007 | Cmiller
Since you got no reply, I will give it my best shot but we do not have a radial inserter because they are really expensive. I would start with Universal instruments. I think its http://www.uic.com. I think they still make them in New York. TDK and Pa
Electronics Forum | Wed May 09 11:59:50 EDT 2012 | aemtexas
Our Panasonic KME Create CM95R-M pick and place machine was in storage for a long time and the system battery died, so now the static RAM is corrupted. We need to obtain a "key" floppy to reflash the static RAM. Thank you in advance for any advice an
Electronics Forum | Mon Jun 24 14:52:40 EDT 2013 | ryansmta
I am in need of two Fuji or Panasonic "tape and reel" holders. I will be using them to hold dummy 0402 and 0201 outline components which have undergone some special treatment and packaged in tape and reel. This is not for SMT application but for s
Electronics Forum | Mon Mar 18 09:04:46 EDT 2024 | carl_p
Sounds like your talking very low volume & component counts really... I would look at Panasonic AM100 for example - low cost, high flexibility but you would need multiple so you could pair it with another... Ideally we would need to understand your
Electronics Forum | Wed Sep 04 13:54:04 EDT 2024 | carl_p
Loved the GC120 but from a price point their insane compared to a panasonic. GC's are excellent chip shooters, ideally need more info & there is naturally a big capacity output between the 2 as the 120 is basically 2 60's... So do you need it? T
Electronics Forum | Wed Sep 18 14:58:59 EDT 2002 | Claude_Couture
Just to add my 2 cents on the adjustment of pitch on MPA feeders: True: Panasonic do not make it easy to change the pitch on MPA feeders, the thickness of a metal part is what sets the pitch. My solution: for example, I get a 24mm X 12mm pitch MPA
Electronics Forum | Sun Mar 12 13:09:33 EST 2000 | Jeff Wilson
Jeff, The problem you are describing MAY be related to the push up pin setting on your component feeder units. Please verify that the push up pin height is set correctly for the feeder units, and the nozzle pick-up and placement heights are to the c
Electronics Forum | Sun Mar 12 13:09:33 EST 2000 | Jeff Wilson
Jeff, The problem you are describing MAY be related to the push up pin setting on your component feeder units. Please verify that the push up pin height is set correctly for the feeder units, and the nozzle pick-up and placement heights are to the c
Electronics Forum | Thu Apr 26 07:08:38 EDT 2001 | pbarton
We are having difficulty in obtaining some feeders for Panasonic MV2V (medium) in the short timescales we require. The feeder types are as follows: 2 off 12x8, 2 off 16x8, and 2 off 8x4. All are 'Q' type. Is there anyone out there who has any spare