Electronics Forum | Fri Jul 30 17:17:08 EDT 2004 | cvega
GPD Global provides a line of system to for small volume solder paste and condutive adhesive dispensing know as the MicroMax. Our systems have an accuracy of 0.001" at the needle tip, capability of two valve mountings, integrated closed loop needle
Electronics Forum | Thu Jun 17 11:24:54 EDT 1999 | jseagle
| Has anyone had problems with the Weller MT 1500 IRON/TIP solder station? | Please advise your problem and resolution. | | ddj | 6/16/99 | I don't like to use the needle tips (MT2 series), but the rest of the tips work fine. The MT2s didn't last
Electronics Forum | Thu Jun 17 16:18:22 EDT 1999 | Earl Moon
| | Has anyone had problems with the Weller MT 1500 IRON/TIP solder station? | | Please advise your problem and resolution. | | | | ddj | | 6/16/99 | | | I don't like to use the needle tips (MT2 series), but the rest of the tips work fine. The MT2
Electronics Forum | Wed Jul 26 11:14:50 EDT 2006 | FredC
Are these covers repacements for the tape guides? If so in retipping many thousands of cp6 nozzles we see that the window in the tape guide is often miscentered and the needle tip rubs on the same place every time it picks. I expect the miscentered g
Electronics Forum | Thu Dec 28 09:49:18 EST 2006 | slthomas
Tough call without seeing the board, but here's my best guess. You don't say if the glue dot is greater in height or diameter in the locations where you have printing (silkscreen), but I would guess that you might get either, or both, depending on ne
Electronics Forum | Wed Dec 21 17:11:58 EST 2011 | davef
Kim: We understand what you're saying. For us, fluxing the BGA and activating the flux are the issues. * If you're squirting liquid flux under the BGA with a plastic bottle with a needle tip on it and then reflowing less than the whole board with a
Electronics Forum | Mon Feb 06 17:24:26 EST 2017 | westshoredesign
So I had the same question too when I was setting ours up. My lazy (and cheap) solution was: for each program I have a universal path that is used up to the first dispense instruction and after the last one then I covered the surfaces underneath tha
Electronics Forum | Wed Jul 29 17:43:26 EDT 1998 | Steve A
| Hi, good friends | I found this site is so wonderful to learn SMT techniques meaningfully. | We now employ 3 Fuji GL-541 dispensors and raw material with Soma IR-120. but we found glue string casually. From my experience from trouble-shooting the c
Electronics Forum | Thu Apr 16 11:50:24 EDT 1998 | Gary Simbulan
| O.K., somebody read a probably hand-written 3 as 8. | Under these numbers, I can find at IBM's Patent Server the following other topics: | USP 4,312,692 | http://www.patents.ibm.com/details?patent_number=4312692: | USP 4,314,870 | http://www.pat
Electronics Forum | Mon Jul 21 09:34:54 EDT 2003 | caldon
A machine for serious concideration MRSI 175uf Features: -High-throughput Underfill -Parallel Processing Conveyor Lanes -Linear Positive Displacement Pump -Total Process Thermal Control -Intuitive Graphical User Interface - Windows NT -Advanced
winsouce.jpg)