Electronics Forum | Thu Jun 24 23:57:42 EDT 2004 | George
Could anyone tell me the difference in PCB material Nelco13 and FR4? PCB dielectric material Nelco13 is quite new for me and I knew nothing about it. For imcoming quality control (IQC), I am asked to identify PCB made of FR4 and Nelco13. How to do th
Electronics Forum | Mon Jun 28 01:44:02 EDT 2004 | George
Thanks a lot !
Electronics Forum | Fri Jun 25 07:13:40 EDT 2004 | davef
Nelco was developed by Park [ http://www.parknelco.com/parknelco/highspeed.htm ] Without fairly involved testing, you may be forced to rely on a c of c from your fabricator. Although, Park may be able to give you a lead.
Electronics Forum | Mon Feb 02 11:51:23 EST 2004 | prs
Hello, I'm working with Nelco 4000-13 material .031 thk and am experiencing some warping. the board is roughly 1" by 3" and the warping is in the long dimension. The grain on the panel is also in the long dimension. Any pointers or advice on contr
Electronics Forum | Thu May 31 22:35:23 EDT 2012 | jacktan
I have encountered PCB delam issue with high density PCB. PCB has 42 layers , 5 mm thickness ,laminate material is NelcoN4000-13EP,Tg 210C and Td 350C. Have pre-bake at 125 c for 12 hrs before assy.My reflow temp is standard with 243 peak and TAL is
Electronics Forum | Fri Nov 13 08:27:43 EST 2009 | herman
Your customer is very unreasonable to demand void-free BGA SJs. Minor voiding is not a condition for rejection per IPC-A-610D, J-STD-001D, or even J-STD-001DS (Space addendum). Having said that, let me tell you that the voiding has little or nothing
| 1 |
winsouce.jpg)