Electronics Forum | Tue May 29 15:52:27 EDT 2007 | ck_the_flip
CURSE BILL GATES! Your next move should be to perhaps reformat the entire hard drive, re-install the software, and THEN try again.
Electronics Forum | Sun Jan 16 16:51:23 EST 2022 | silverlead
Chapter 7 - Machine Control of the DEK manual outlines connectivity between the rising table servo node 6 and the NextMove ES card. If you don't have the manual, just PM me. I'm not an expert in DEK repair, but the solution could be as simple as clea
Electronics Forum | Thu Jan 13 15:17:27 EST 2022 | goseese
Thank you very much I will look for something moving, loose or getting pinched when the table moves. -- Update -- checked every single connector, all the purple cables/connectors too. Everything it tight and not getting hung up. Checked all the
Electronics Forum | Wed Aug 14 13:24:18 EDT 2013 | eadthem
We just designate shelves with signs, PULL HERE, Move UP NEXT, MOVE UP 2nd, MOVE UP 3rd, We also keep paste in the incoming case, if it has one until its time to open it. Our operators are the ones who stock it and as long as they know they own
Electronics Forum | Tue Jul 21 07:05:49 EDT 1998 | WAYNE
(fishing).. Has Sanyo developed a bulk feeder for 201's and do you feel that bulk feeding will be the next big move in placement equipment? In New England people are talking bulk feeding, but few people have elected to go that way. As with most
Electronics Forum | Thu Mar 26 11:29:31 EDT 2009 | cyber_wolf
I talked to Mydata service (briefly) 3 times. Halfway through the 3rd call it was suggested to me that we set up a service call. Times being what they are, we are not willing to go that route yet. Thankfully we are not in dire need of this machine ri
Electronics Forum | Thu Jun 19 07:41:25 EDT 2008 | davef
And that's the key thing for an assembler. Who cares if the part is bone dry? Assemblers want to get the part dry enough so that soldering process does not destroy the part, so that he /she can move on to the next issue.
Electronics Forum | Wed Apr 29 17:51:44 EDT 2009 | smt_guy
One more thing: I have a Panelized PCB with 8 boards on the X directions. As I move to the next PCB towards the right my misalignment moves to the right by 0.02mm. By the time I reach the 8th PCB I'm Off by between 0.12mm to 0.14mm. My fine pitch
Electronics Forum | Fri Jul 12 15:41:32 EDT 2024 | ktm250rider
Im trying to program our JUKI KE750e I have 6 components to place. The machine places the first 3 but then ends the program. Ive tried saving the program and deleting the 3 that are placed, and the machine will place the other 6. However, if i add
Electronics Forum | Thu Nov 30 08:15:16 EST 2006 | jdengler
If you define cycle time as the time it takes to complete one board it is a useless number. What you need to know is the time it takes to complete one board and start the next board. This means first fiducial on first board to first fiducial on th
.gif)
winsouce.jpg)