Electronics Forum | Thu Mar 18 00:41:23 EST 2004 | fdr4prez
You need to got to Nix of America's website. They have a fixture that you can slide strips of carrier tape into. http://www.nixofamerica.com/new.htm#CTT
Electronics Forum | Thu Mar 18 07:35:06 EST 2004 | Alan
Thanks, I have more than enough resources now. I am especially interested in the Nix Carrier Tape Tray. Such a simple idea. Thanks for the contact info. Frank.
Electronics Forum | Mon Mar 22 15:49:40 EST 2004 | Frank
You can also do what I was doing before we found the one at Nix. We simply used double-sided tape and taped the carrier tape down on to the floors of the tray tower. Can't get much more 'simpler' than that!!!
Electronics Forum | Thu Apr 09 09:42:12 EDT 2015 | fzpd2000
I am looking for high quality polyimide PCB manufacturer. I have seen a few with the labels: NIX-6-0 Anyone knows who makes these boards? Or other good polyimide PCB builders? Any comments are greatly appreciated. F.Z.
Electronics Forum | Wed Oct 02 11:44:58 EDT 2002 | slthomas
We found that a slightly more active flux was all we needed to provide sufficient wetting on the one AgPd part we put down. Unfortunately the paste we tried also slumped terribly, so we nixed that fix. It's a low volume product (50, once every 3 mo
Electronics Forum | Fri Feb 14 22:02:04 EST 2003 | caldon
DAVE- The way we got around it was simple- Our Mole for profiling is RF and the cell phones would interupt the data transfer so we nixed all cell use. Also, our BTU oven was in constant RF communication with our KIC and so cells were band from the fl
Electronics Forum | Mon Nov 16 11:13:52 EST 2009 | tpappano
I have seen one made by Nix, but it is not quite what I want. I'm imagining a simple slab of plastic with multiple 8mm wide milled/molded dovetailed slots so that as many strips as possible may be mounted within the width of a standard component tra
Electronics Forum | Thu Apr 13 16:45:57 EDT 2017 | solderingpro
Hello Nicky! I do not know of an in-line cleaning solution, however I would take a look into the NIX America Magazine Cleaning Solution. It is a batch process unit that somewhat resembles a large drying and washing machine combo. I saw one at IPC
Electronics Forum | Tue Jun 27 14:40:41 EDT 2006 | pms
SrTech, Thanks for popping in. Your MyData advice has always been good. Anyway, all of our TM8FC's do have the correct seperators. So nix that. I thought the timing only had to do with advancing and stopping the component into the pick line correctl
Electronics Forum | Wed Aug 03 11:21:34 EDT 2011 | davef
We don't know what you mean by 'high temperature' Board storage racks * FKN Systek http://www.fknsystek.com/PCB%20Racks.htm * US Plastic http://www.usplastic.com/catalog/item.aspx?itemid=24577&catid=745 * All-Spec http://www.all-spec.com/products/
