Electronics Forum | Sat Feb 14 08:21:13 EST 2009 | davef
We believe that it's perfectly resonable for you to define the cleanliness that you require. We recommend that you leave it at that and not define the process or materials that your supplier use in meeting that cleanliness level. Start with a dirty
Electronics Forum | Mon Jul 30 21:03:44 EDT 2001 | davef
You should specify the level of res based on the effect of the res on the end-use of the product. J-STD-001 defines cleanliness requirements for ALL flux types, including water soluble and no-clean that you mention. 1 There is no equivalency betwee
Electronics Forum | Sun Jul 29 21:23:27 EDT 2001 | nifhail
When carry out the contamination test,do we measure for Chlorides on water soluble and No-clean fluxes? 1) What is the equivalent factor for machines developed to test the board cleanliness, Omega-meter vs Ionograph vs Zero-ion. 2) What values do we
Electronics Forum | Thu Nov 02 17:15:48 EST 2006 | Mike Konrad
Asoe, The systems you are describing are Resistivity of Solvent Extract (ROSE) Testers. These systems are available using one of two technologies, Static or Dynamic. Both systems use a calibrated test solution comprised of IPA and DI water. The t
Electronics Forum | Sat Sep 26 19:09:17 EDT 1998 | Graham Naisbitt
As an addendum to Daves posting, please consider that: There is no such thing as no residue fluxing. A no-clean must herefore, have benign residues - in other words, they are not as efficient at removing surface oxides to enable good solder joints. S
Electronics Forum | Fri Apr 14 13:30:20 EDT 2000 | Murad Kurwa
Hi All: Can you tell me specifically if you converted an exiting product made with Clean process using WS609 or compatible to 'No-Clean' process. We have to convert assemblies from current clean process at a CEM to No-Clean process in our own factor
Electronics Forum | Thu Aug 21 23:35:20 EDT 2003 | kennyg
For ICT purposes I may need to print solder paste on 0.015" test vias. No-clean is not an option for this assembly and OA seems the only choice. Can flux be safely removed from inside the via from the other side during a standard water wash process
Electronics Forum | Fri Jun 05 15:06:26 EDT 1998 | Dave F
| I have just been assigned to look into the ionic chromotograhy test on our PCBA but I have zero knowledge. Could anyone help to explain what is this test about? Is it | a) a destructive test? | b) What is the measurement unit of this test? | c) Wh
Electronics Forum | Sun Jun 07 19:09:21 EDT 1998 | Graham Naisbitt
Chiakl Ion Chromatography has been perfectly described by Dave, but here are a couple of extra considerations: Ion Chromatography will tell you precisely what is present on the surface of your board/assembly but it will not tell you whether it will b
Electronics Forum | Mon Jun 08 20:03:07 EDT 1998 | Dave F
| Chiakl | Ion Chromatography has been perfectly described by Dave, but here are a couple of extra considerations: | Ion Chromatography will tell you precisely what is present on the surface of your board/assembly but it will not tell you whether it
winsouce.jpg)
