Electronics Forum | Thu Feb 19 08:57:20 EST 2004 | northern
Has anyone ever seen a bulbous joint (on 1 side of 1 designator) on every board? I checked the preheat profile at the wave and have played with dwell times but can't get rid of it. I checked the archives and didn't find much. Any help would be apprec
Electronics Forum | Thu Feb 19 13:43:01 EST 2004 | northern
What would cause this? Too much pre-heat, not enough, too much dwell, not enough? I am staying within the flux specs for preheat and can't seem to affect it much. Can board/parts contamination lead to this? I think that is a reach but I'm runnin out
Electronics Forum | Fri Feb 20 07:50:46 EST 2004 | northern
Dave, you are correct they DID move (blows my theory on bad parts)! I will update with the info. you brought up but I have 1000 of these boards on the line as we speak, any ideas on a quick fix? Inquiring managers want to know! th
Electronics Forum | Fri Feb 20 14:05:45 EST 2004 | northern
I talked QC into accepting the bulbous joint, the problem was it was often shorting to a well placed via next to it. I say WAS because I reduced the dwell time in the main wave (you are correct 50/50 flow) to approx. a nanosecond, which reduced it en
Electronics Forum | Thu Apr 22 14:31:03 EDT 2004 | northern
I have used both the MPM and DEK. The MPM's look nicer and have a few fancy features but the DEK printed more consistent time and time again. I believe you spend a lot more money for MPM's when DEK will give you what you need.
Electronics Forum | Sat Jul 14 12:01:04 EDT 2007 | clickeasi
I am looking for some who provide installation and training on IP2 in Northern Cal.
Electronics Forum | Mon Aug 28 19:07:12 EDT 2000 | C.Y. Ong
Does your assembler have to be located in the South-east? We are located in Northern California and offer assembly services with high turn times. Please contact: C.Y. Ong O-Tech 415-642-1939 otech@flash.net
Electronics Forum | Mon Jun 29 13:02:04 EDT 1998 | Zsolt Takacs
:I am looking for a in circuit test provider doing bed of nails and/ or boundary scan test in Northern California. |
Electronics Forum | Thu Jan 10 12:02:14 EST 2002 | mparker
What is the expected volume to be outsourced to the US and where are your distribution sources? Do you have a particular US region in mind? I'm in Northern California - if you are interested in producing here, we can talk further offline.
Electronics Forum | Fri Mar 28 20:09:29 EST 2003 | fastek
Dreamsniper- Aren't you in Northern California? Shoot me an e-mail. I might have a good deal for you regarding printers. fastek@attbi.com
