Electronics Forum | Fri May 17 04:08:23 EDT 2013 | croma
I am interested about the most effective way to clean the Nozzle for Universal GSM machine and which fluid to use?
Electronics Forum | Fri May 17 04:26:13 EDT 2013 | eniac
I don't know about Universal GSM, but for my Mirae's nozzles I use IPA and small US-bath.
Electronics Forum | Tue May 21 10:20:09 EDT 2013 | swag
We've been using S100 total cycle cleaner for years - diluted in ultrasonic bath for about 10 minutes. Blow dry with medium psi nozzle. Works great.
Electronics Forum | Fri May 17 08:09:13 EDT 2013 | emeto
Ultrasonic Bath will be always your best choice. For cleaning solution you have to make more research. It will depend on your Nozzles material, company and ultrasonic bath requirements. For some ultrasonic baths alcohol might go in flames(some of the
Electronics Forum | Mon May 20 15:19:50 EDT 2013 | smtventasmex
i been trying to do that with a lot of my customers but they can not clean that well it works for just one time but you have to remember than this parts are platic, and will have some damages, i can sell to you quality nozzles at the best price on th
Electronics Forum | Fri May 17 08:43:46 EDT 2013 | fredcalkins
If you have Flexhead nozzles you need to be careful that whatever solvent you use does not attack the gasket adhesive. I might try a couple of drops of a spray like WD-40 or LPS. Let it soak for a few minutes and blow it out with compressed air. Repe
Electronics Forum | Fri May 30 08:24:08 EDT 2008 | cyber_wolf
The nozzles get centered at zero degrees and 180 degrees. I believe the yellow asterisk is the measurement at zero degrees, when it rotates to 180 is when you will get a red X or a green O. (In other words the yellow asterisk is normal) I think you
Electronics Forum | Sun Nov 17 10:50:11 EST 2013 | sara_npi
Hi, I have difficulty on solving unknown nozzle st 17.situation goes like this,almost I run bout 6 models each day,but 1 to 2 models only have this problem.I almost done a few basic troubshoot such as clean censor st 17,clean cluch using prope
Electronics Forum | Tue Nov 19 12:34:33 EST 2013 | jimmyboz
I am not trying to be critical but, you didn't even say Fuji CP-6 problem. There are CP-6, CP-642, and CP-643 machines, are asking 2 model as 642? Anyway, slow the cam speed down in the proper to 40 or 50%. If the problem goes away check the mainte
Electronics Forum | Wed May 24 04:28:18 EDT 2006 | ge_lim
Hi Anyone use Warton Active '8' flux to clean the nozzle? Share me your experience
winsouce.jpg)
