Electronics Forum | Fri Dec 10 16:32:55 EST 1999 | John Thorup
well... it depends on what you are placing. Many odd-form placement machines, like Chad or Jot, use some sort of mechanical gripper as a "nozzle" without vacuum. John Thorup
Electronics Forum | Sun Oct 02 19:20:28 EDT 2022 | linux
the info you require comes with the nozzle when you purchase it from panasonic. what's the nozzle number. is it gripper or vacuum.
Electronics Forum | Wed Dec 17 09:04:19 EST 2003 | Kev
Not a europlacer user, but on our Philips Gem, we use a gripper nozzle for the upright molex conn. We found that using a standard vac nozzle negated both the speed of travel from feeder to PCB and the placement accuracy, as the connector moved on the
Electronics Forum | Wed Mar 20 15:01:37 EDT 2024 | linux
Reboot usually does the trick, Reason for these fault, (1) Nozzle holder, the grippers are holding the nozzle too tight, stretch the spring slightly, (2) shaft is sticking, removed the head lubricate the shaft.(3) Nest not opening and closed within t
Electronics Forum | Tue Sep 10 08:01:47 EDT 2002 | mpotter
Kevin If you want to go automated then why not take a look at the Philips ACM. It is the flagship for placing SMT and Oddform packages. We use Vacuum nozzles and Grippers to handle many truly oddform components.
Electronics Forum | Wed Jun 05 15:15:37 EDT 2019 | cristian_amlima
Hi Guys.. greetings! I hope someone could help me. Does anyone knows how to configure a gripper nozzle to juki 700 series? (more specifically FS730). With this nozzle the machine should blow to inflate the nozzle and I don't know how to change from
Electronics Forum | Tue Oct 21 05:28:37 EDT 2014 | rob
Hi Emanuel, Chingyi do quite a wide selection of rubber tipped nozzles http://www.chingyi.com.sg/solutions_smt.php If you are in Europe, then Wilfred @ Europe-SMT knows these machines better than most: http://www.europe-smt.com/ Our personal favo
Electronics Forum | Thu Feb 06 13:18:43 EST 2003 | Vince Cook
Mr. Fuller, I came across your inquiry while doing some light lunchtime reading. I work for Universal in the group that creates nozzles/grippers. We evaluate applications involving a wide vareity of components, connectors, etc. I'm not a salesman
Electronics Forum | Fri Feb 01 07:38:38 EST 2019 | scotceltic
What do people recommend for PCBA Depanelers/routers. Need to have the following: Inline China support (Shanghai area), Chinese language capable, Grippers/vacuum nozzles to pick individual boards from panel to designated area. Thanks
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No
.gif)
