Electronics Forum | Wed Jan 24 17:48:28 EST 2018 | ranap121212
Hello Could I ask for advice? We have new machines with a full nitrogen tunnel. Type of soldering nozzle: worthmann 5 rows and next nozzle (in this same machine) worthmann 7 rows. One person in my organization claims that the delta nozzle is not wor
Electronics Forum | Thu Mar 28 20:06:53 EDT 2024 | cbeneat
What type head is it? Try changing the internal filters. If it is a low number head, ie: 1-4 on an 8, 1-6 on a 12 or 1-8 on a 16. These can be accessed by pushing the head to the opposite table for removal. Chapter 11, section 11-6 page 11-6.3 in mai
Electronics Forum | Wed Mar 20 14:54:15 EDT 2024 | linux
Vacuum Low, Shows up on changeover when the head picks a different size nozzle, remove mesh filter, unplug the clear pipe from the top of the head, put a small amount of alcohol down the pipe and blow it out with the air gun, You should check for a h
Electronics Forum | Mon Jun 03 14:37:22 EDT 2024 | carl_p
You can download the full UIC nozzle library from them direct. They will also do the custom nozzle for you. you could also go out to the local CNC places etc. As for materials, depends what will work for the part in question. stainless is an option
Electronics Forum | Fri May 31 15:18:03 EDT 2024 | poly
I'm thinking about making a custom nozzle for a hirose connector my UIC machines have trouble putting down correctly. I'm thinking of printing the nozzle from stainless steel or something else. Does anyone have a material preference for nozzles? I
Electronics Forum | Fri Sep 08 22:37:30 EDT 2017 | ttheis
If you have two changers and only one head, make sure there is only one open port (one changer should be filled up and the other should have one open hole.) The head should be full of nozzles as well. As you mentioned go into the diagnostics and act
Electronics Forum | Tue Aug 03 17:45:43 EDT 2010 | swag
I used to wrench on those all the time! I really should be more help to you but it was a few years ago... A few more things to check - clean the line sensors on the back of the machine. Check to make sure you don't have a feeder that is allowing t
Electronics Forum | Wed Aug 04 08:40:37 EDT 2010 | keiths487
I used to wrench on those all the time! I really > should be more help to you but it was a few years > ago... A few more things to check - clean the > line sensors on the back of the machine. Check > to make sure you don't have a feeder that i
Electronics Forum | Thu Mar 28 19:36:21 EDT 2024 | linux
ensure the nozzle is inserting fulling into the nozzle holder. ensure shaft is lubricated, clean between the magnetics on the shaft. complete nozzle height calibration
Electronics Forum | Wed Dec 08 20:00:56 EST 2021 | scotceltic
Throughout the years in SMT PCBA production I have seen OEM's and contract houses move away from a Double-Sided PCBA Line setup. Ex Single pass for bottom-side and then straight into duplicate equipment for top-side. The norm these days seems to be
