Electronics Forum | Tue Mar 08 10:58:13 EST 2011 | aj
Hi all, This error appeared this morning and prevents me from opening any of the jobs. Everything was working fine yesterday!! Any advise as to how to deal with this? Thanks, Alan...
Electronics Forum | Wed Dec 20 10:04:07 EST 2017 | junkeymonkey246
Hello there, I work at Redcom Laboratories in Victor NY. I'm a student and new to being a machine repair technician. I'm having some bother with one of our TYCO QUAD QSP-2 machines. I keep getting the errors: "WARNING: Head#2 Nozzle RUNOUT=27.1 mi
Electronics Forum | Mon Nov 29 16:04:47 EST 2004 | Terrapin Station
They are actually diamond impregnated tips. The tip can be cleaned using a special jig. this will extend the life. these nozzles are from a machine platform dating back to 1997. The RSS can last for 1,000,000 cycles. SA and MA are similiar but requi
Electronics Forum | Wed Feb 23 22:38:28 EST 2005 | davef
We: * Cure 1B73 according to spec in a heat box, like a Blue-M * Clean nozzles [one set in use, one set being cleaned] in thinner in a bronson ultrasonic cleaner * Haven't evaluated coatings in years, but would do it according to J-STD-001C, Reqmnts
Electronics Forum | Fri Nov 17 15:20:37 EST 2000 | Kris
Dave, That's exactly what we are seeing. There is a trail of components leading away from the pick point, all of which are 0402 parts. I can remove the feeder from the machine, advance a few parts into view, turn over the feeder and only half will
Electronics Forum | Fri Apr 27 13:35:46 EDT 2007 | sjpence
I do not know of any standard recommended values for impact pressure in cleaning equipment. They act more as a guide when examining the various choices manufacturers have made for the spray flow, nozzle pressure, nozzle spray angle and other factors.
Electronics Forum | Thu Nov 11 09:49:20 EST 2004 | cyber_wolf
In the last 6 months or so we all of a sudden started having a placing problem on PLCC28 components. We are stumped, and Fuji is stumped. Has anyone ever seen this before ? (This is on a CP43) Here is what we have tried and verified: �� Nozzle def
Electronics Forum | Wed Jun 16 16:54:13 EDT 2004 | Vince Cook
Greg, Just to cover the formalities, I work for Universal, and specifically with the GSM Platform. The GSM with a 4 spindle head can place 0201s, however, there are a number of things you'll want to have, chief among them a 1 mil/pixel upward lo
Electronics Forum | Wed Apr 07 03:44:40 EDT 2010 | jackevest
The missing rate spec. of normal machine is under 0.3%, for our experience 0.1% is normal for average, if you can maintain the machine well, like the nozzle cleaning, feeder maitain...you can keep the 0.05%.
Electronics Forum | Mon May 09 16:32:05 EDT 2011 | veeckm
I got the camera nozzle offset corrected but after the machine runs for a while the offset will drift and its out the specs I set it to. Any help is appreciated.
