Electronics Forum | Wed Jul 26 14:40:28 EDT 2006 | FredC
I just checked a hand full of scrap nozzles and the scuffing is usually on the right or left of the needle. If you have the cross pin facing you and looking down on the nozzle most of the scuffing or wear was on the left side, sometimes on both sides
Electronics Forum | Wed Jul 26 11:14:50 EDT 2006 | FredC
Are these covers repacements for the tape guides? If so in retipping many thousands of cp6 nozzles we see that the window in the tape guide is often miscentered and the needle tip rubs on the same place every time it picks. I expect the miscentered g
Electronics Forum | Fri May 17 04:08:23 EDT 2013 | croma
I am interested about the most effective way to clean the Nozzle for Universal GSM machine and which fluid to use?
Electronics Forum | Thu Feb 24 11:45:17 EST 2005 | JB
Any Universal GDM users out there, what nozzle type are you using succesfully to dispense glue on 0603's? Single or Dual tip? How about standoffs? Thanks in advance for the info.
Electronics Forum | Fri May 17 04:26:13 EDT 2013 | eniac
I don't know about Universal GSM, but for my Mirae's nozzles I use IPA and small US-bath.
Electronics Forum | Tue Mar 01 03:25:33 EST 2005 | bing
We are using a GDM with a linear piston pump fitted to dispence adhesive on 0603's. Use Universal part number 43273801 needle with a 42346504 piston. The single needle dimentions are 0.010 ID, 0.028 OD, 0.005 stand off
Electronics Forum | Sun Apr 30 20:52:33 EDT 2023 | poly
I've got access to all the manuals. Alas my 7 spindle head (flexjet 3 on a gx11s) detects collisions when picking even when no nozzle is in the spindles and they aren't near anything. My other machine is working well.
Electronics Forum | Sat Dec 03 01:07:29 EST 2022 | poly
I've got access to the universal manuals / voyager but I haven't found a section that describes the feeder teach setup process, I can pick up the teach slug onto the conveyor and then get into feeder teach but if I teach the corners of the slug as t
Electronics Forum | Mon Mar 13 19:25:12 EDT 2023 | griinder
Barcode Definition - you can input the search window size. Default lighting works best for me. I name it "bc". Window>Barcode List- This is where you input the position on the panel or circuit 1, give it a ref designator "again I use bc", and select
Electronics Forum | Thu Jan 24 09:50:59 EST 2019 | my3sons
We can handle this challenge. If you would like to get an RFQ on a custom nozzle, please complete our form: http://www.cotinc.com/nozzle/
