Electronics Forum | Mon Feb 26 16:16:41 EST 2001 | bcaler
Wanted, Universal's part number for a 201 nozzle used on the HSP4796. Just the part number for one nozzle please. Or contact me if you have one you can sell me. Thanks, Brian
Electronics Forum | Wed Feb 28 20:38:07 EST 2001 | davef
So, what does John Rukavina at Sanyo [888-672-5353] say?
Electronics Forum | Thu Mar 22 19:33:53 EST 2001 | ben
i guess you have already checked this by now, but is your line sensor(thickness)operating correctly. This could account for nozzle breakage on placement
Electronics Forum | Wed Feb 28 14:55:20 EST 2001 | bcaler
Thanks for the link Dave, but it doesn't show a P/N for a 201 nozzle (unless I'm blind). I guess it's a big UIC secret. Brian
Electronics Forum | Sat Feb 17 21:46:26 EST 2001 | edmo
I am the new user for siplace HS50 for about 3 months, running 24 hours production. I used to perform PM every 2 weeks. I have just changed all the plungers(Alu) and nozzles(904) and some nozzle sleeves due to components high throw-out. The estimat
Electronics Forum | Fri Sep 07 07:39:11 EDT 2001 | caldon
Can you confirm the components are being picked up from the feeders? If the Feeder table calibration is incorrect the components could be picked up off from the begining. This would result in 1) nozzle barely picking up the part and as the head moves
Electronics Forum | Wed Feb 28 14:41:31 EST 2001 | davef
http://www3.uic.com/852568c80050acb1/9d77f80a90bd656c8525692700744d90/a87e35634983d6458525697d005f8a01?OpenDocument
Electronics Forum | Fri May 25 14:40:05 EDT 2001 | greggg
Can anyone recommend a low-cost line-balancing software application for use with a Universal HSP (4790) and a GSM-1 with Flex Jet Head (7 nozzles)? Thanks, Greggg
Electronics Forum | Thu Jul 19 14:50:10 EDT 2001 | tpeterson
I am looking for advice on placing 0603 parts with an old 4766. Also need a source for tooling and nozzles for the 0603 parts. Thanks, Tom
Electronics Forum | Wed Aug 22 14:24:39 EDT 2001 | markhoch
I used a CamAlot 5000 to apply conductive epoxy on an aluminum substrate about 4 years ago. I used the largest diameter nozzle CamAlot had, and I bumped the dispense and dwell times way up. It was the slowest stage in the process, but it worked out o
.gif)
