Electronics Forum | Tue Feb 05 18:26:34 EST 2008 | janz
Hello, We have FCM base 2 machine (Philips-Assembelon). I am trying to find out whether it is possible to install instead vacuum pump (make noise and power consumption) venturi system. Does anyone try to do this.? What was the result.? What vent
Electronics Forum | Mon Dec 18 14:11:02 EST 2023 | erikfriesen
Has anyone ever replaced the venturi vaccum pump on the CP45 or other series machine? Or used a centralized vaccum system? It works fine, but air consumption seems excessive. This is what is in there, it probably uses 10cfm at least. https://www.p
Electronics Forum | Mon Jan 29 13:06:48 EST 2024 | erikfriesen
A follow up, using an external vacuum pump works fine, and reduces load on the air compresssor, probably using 1/3 of the air.
Electronics Forum | Fri May 14 16:49:17 EDT 2021 | winston_one
Agree with WiIIR and also can recommend to play with vaccum pump RPM . Slower vacuum increasing have help me to resolve one problem caused by the vacuum (it was solder splash from BGA balls, but the reason can be similar to your case). Also check i
Electronics Forum | Thu Sep 11 03:33:22 EDT 2014 | fnorradd
The machine has a vacuum pump in it. This is what I expected also, but the machine does not have a Vac pump on it. The unit is sealed by Dage, the unit is a crystal type vacuum tube not a filament type. Regards. Darron
Electronics Forum | Wed Sep 10 14:44:27 EDT 2014 | cyber_wolf
The machine has a vacuum pump in it.
Electronics Forum | Wed Oct 29 18:08:35 EDT 2014 | tombstonesmt
Good afternoon. Not sure if this is available at an engineer level. Perhaps and SD card with field service access is necessary. We have two lines with NPM-W's and the most we've been able to do is actuate vacuum on the heads during flow checks.
Electronics Forum | Thu Mar 28 19:23:35 EDT 2024 | linux
replace flow, vacuum sensor
Electronics Forum | Wed Mar 20 14:54:15 EDT 2024 | linux
Vacuum Low, Shows up on changeover when the head picks a different size nozzle, remove mesh filter, unplug the clear pipe from the top of the head, put a small amount of alcohol down the pipe and blow it out with the air gun, You should check for a h
Electronics Forum | Tue May 26 12:25:34 EDT 1998 | Wayne
Vacuum Bakeout Ovens For many years vacuum bakeout ovens have been used in the hybrid industry for removal of moisture from ceramic cercuits prior to hermetically sealing packages. In this process the vacuum oven certainly reduces the bakeout cycle
