Electronics Forum | Wed Aug 23 02:48:11 EDT 2006 | ec
Hi, Appreciate someone could advise or forward a format to me how to work out number of pallet needed for wave-solder if the machine speed is at 1.0m/min, volume per month is 4500 sets, pallet length 0.3 meter, conveyor length 5 meter...... Looking
Electronics Forum | Wed Aug 23 08:08:25 EDT 2006 | aj
There are a few variables that you have to consider : 1. Hours available on Wave Machine ( are other products going thru the same wave) 2. What beat rate are the boards being supplied from previous station?i.e. do you envisage the waveto be a bottl
Electronics Forum | Tue Dec 05 22:27:05 EST 2023 | padawanlinuxero
Hello, I am experiencing issues with one of my PCB suppliers. Specifically, I am having trouble with solder shorts occurring on a SOIC8 component, and always in the same pads. Upon inspection with a microscope, I discovered that three of the pads ar
Electronics Forum | Wed Jan 14 23:08:58 EST 2015 | vmam99
What is part number please help. http://image.ohozaa.com/view2/y64BPUKtiypZovyB
Electronics Forum | Thu Mar 15 21:09:07 EDT 2007 | KEN
Cecil, the board is a component.
Electronics Forum | Thu Mar 15 09:58:22 EDT 2007 | KEN
Anyone know which IPC document covers this? Me thinks 6....but want the IPC spec. to back this up.
Electronics Forum | Thu Mar 15 10:28:46 EDT 2007 | cecil
Just askin but why would someone even want to subject an assembly to even 6 reflow cycles? As far as how many cycles that an assembly can be subjected to, wouldn't that be determined my your components?
Electronics Forum | Thu Mar 15 20:49:16 EDT 2007 | davef
There is no IPC document, nor should there be. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=48102
Electronics Forum | Fri Jan 16 04:04:59 EST 2015 | philc
This looks like it might be a Fairchild part. Try emailing them with the marking, and see what they say.
Electronics Forum | Thu Mar 15 12:33:50 EDT 2007 | ck_the_flip
To do a profile at most companies, if you don't have a scrap board handy, you'll use the already-soldered board that's already been through ONE reflow cycle. You spend time attaching T/C's with the aluminum tape - after all, the prep-work is half th
