Electronics Forum | Wed Aug 23 15:55:06 EDT 2006 | Chunks
Super glue too. It's not just for sniffing anymore... Do I know about O-rings or OH!-rings?
Electronics Forum | Tue Jul 18 09:11:48 EDT 2000 | graeme
The o-ring comes part of the feeder coupling. Universal part no 44579401
Electronics Forum | Fri Dec 21 09:36:48 EST 2007 | mulder0990
Measure the O-ring if you are able to get to it and take the specs to any industrial supply shop, online or otherwise, and see what their price is. I repair Fuji feeders, so I cannot really help on the size but that is how I get the O-rings for my f
Electronics Forum | Wed Aug 23 11:06:33 EDT 2006 | cyber_wolf
Chunks, I figured you would know about O rings. :/ Try these... http://www.callapg.com/orings.aspx?id=standard&sitrackingid=530036&kc=E1HvV4hZ7kYxr863lQqmwGDECdagjxzxvO8ZvgjH Mcmaster Carr also sells O ring splicing kits.
Electronics Forum | Sun Sep 09 02:24:04 EDT 2012 | audere
More lube on the O-Rings caused lots of problems. Nozzles would drop downward at times. So I pulled everything out and started from scratch. Testing 3 new Z-Rods, 4 used Z-Rods in good shape (replaced the O-Rings) and around 20 nozzles - the proces
Electronics Forum | Fri Jul 14 10:46:43 EDT 2000 | greg
I am looking for the part number for the little black o-ring on the front end of the GSM feeder. thank you
Electronics Forum | Thu Dec 20 17:47:52 EST 2007 | gregcr
Hi All does anyone know the size of the o-ring on the front coupling on the GSM feeders? I know I can get them from UIC, but maybe there is a size I can buy in bulk to maintain my feeders. thanks
Electronics Forum | Sat Feb 02 14:19:16 EST 2013 | bangerla
Could someone provide the size or source for the o-rings on the z rod of a Quad IVC, which hold the nozzle?
Electronics Forum | Thu Feb 27 12:01:21 EST 2020 | lpbro
We had a similar type of part that gave us trouble. Our solution was an o-ring attached to the end of the nozzle, we used a type of shoe-goo to adhere the o-ring to the nozzle. May be cheaper than a custom nozzle.
Electronics Forum | Thu Apr 13 15:55:08 EDT 2006 | FredC
I am not familiar with the sot363. Is it large enough that you could use a 4mm, 5mm, or 8mm O ring type nozzle? If it is large enough to use one of these nozzles the O ring is slightly compliant and the O ring material has a higher coefficent of fric