Electronics Forum | Sun Sep 27 10:42:35 EDT 1998 | l atch
I'm looking for a chart that will help me identify smt resistors and capacitors. I have figured out a few on my own. a resistor with the numbers 510 printed on it was a 51 ohm resistor. numbers 221 was a 220 ohm resistor. numbers 102 was a 1k resis
Electronics Forum | Mon Sep 28 09:18:30 EDT 1998 | Ben Wilmot
The majority of SMT resistors use the following notation. 10 X eg 153 represents 1k5 resistor The third digit in the sequence denotes the number of zeros to add after the first two digits giving the value in ohms. Many Caps will follow the same nota
Electronics Forum | Thu Jun 18 17:16:49 EDT 1998 | Bill Christian
I am looking for a quickly obtainable procedure on the repair of SMT boards. I am particularly interested in discrete components, such as capacitors and resistors. I need to know the importance of pre-heating the board and components. What is a good
Electronics Forum | Fri Jul 28 09:30:04 EDT 2017 | proceng1
We only use it for resistor color code and most other comps it just checks for presence. No solder joints.
Electronics Forum | Thu Jun 18 21:13:22 EDT 1998 | Dave F
| I am looking for a quickly obtainable procedure on the repair of SMT boards. I am particularly interested in discrete components, such as | capacitors and resistors. | I need to know the importance of pre-heating the board and components. What is
Electronics Forum | Fri Jun 19 21:00:20 EDT 1998 | Dennis O'Donnell
| | I am looking for a quickly obtainable procedure on the repair of SMT boards. I am particularly interested in discrete components, such as | | capacitors and resistors. | | I need to know the importance of pre-heating the board and components. Wh
Electronics Forum | Fri Jun 19 21:04:21 EDT 1998 | Dennis O'Donnell
| | I am looking for a quickly obtainable procedure on the repair of SMT boards. I am particularly interested in discrete components, such as | | capacitors and resistors. | | I need to know the importance of pre-heating the board and components. Wh
Electronics Forum | Wed Aug 13 12:58:32 EDT 2003 | babe
Lets try this again, Every shelf system should be grounded individually. Every six feet per EOS/ESD requirements. Do not daisy chain anything. Secondly, Depending on the depth of paint,style of pain that your shelving system has. A static charge woul
Electronics Forum | Mon Sep 18 14:43:06 EDT 2006 | jdengler
Steve, I don't think it was a Yageo if the value is 10 ohms. Yageo would label them as 10R0 for 10 ohms. 1002 would be a 10K ohm resistor. Jerry
Electronics Forum | Mon Sep 18 17:47:56 EDT 2006 | Cmiller
I would get yourself a better meeter. All resistors are sorted as far as I know so if you had a good meter you could just grab a reel of 5% parts and sort them your self. I have seen the markings both ways so I would not immediatly assume the parts w
