Electronics Forum | Tue Jan 22 07:34:07 EST 2002 | cabjerk
Hi All; We are having problems finding software for off line programming of our GPD machine. We have talked to GPD and no luck. Any leads out there? Thanks Carl B.
Electronics Forum | Fri Feb 08 14:46:25 EST 2002 | dod
Unicam has an interface that will program the dispense machine from GPD and the ouput has been validated by GPD.
Electronics Forum | Thu Feb 28 13:59:54 EST 2002 | Jeff
CircuitCAM is a Partner with GPD and worked along with GPD to create the interface to support their dispensers.
Electronics Forum | Mon Jan 28 12:09:27 EST 2002 | billschreiber
Hello Carl, Smart Sonic has introduced the Assembly Module for off line programming of assembly equipment such as GPD. You can see it on the Smart Sonic website: http://www.smartsonic.com Click on the AOI/StencilScan and GlueScan link. If you hav
Electronics Forum | Tue Jan 22 20:30:44 EST 2002 | davef
Start with the following: * Aegis ISC (Circuit CAM) * Mitron (GenRad) (CIMBridge) * CAE Technologies (C-Link)
Electronics Forum | Mon Jan 28 17:34:32 EST 2002 | PeteC
The product mentioned by SmartSonic (stencil cleaner maker) is from ScanCAD International. See http://www.scancad.com
Electronics Forum | Fri Mar 03 16:11:07 EST 2000 | cpitarys
Yes it is Ok and some folks ae doing it now, but unfortunatly IPA may not be the best solvent for this application. Take a small vial of the ipa and put some of your smt adhesive into it, shake it up and watch what happens, now step this up onto a l
Electronics Forum | Fri Mar 03 16:11:07 EST 2000 | cpitarys
Yes it is Ok and some folks ae doing it now, but unfortunatly IPA may not be the best solvent for this application. Take a small vial of the ipa and put some of your smt adhesive into it, shake it up and watch what happens, now step this up onto a l
Electronics Forum | Fri Jun 25 13:00:48 EDT 2004 | haviland
Hi--We deal in used and recond. equipment in the Midwest, and have available a 1999 Amistar #7100FV w/ a nice complement of feeders, (6) pick up heads, rated component placement at 18,000 pph. Does .0402's, .3 BGA w/ 20 mil pitch, Full vision system,
winsouce.jpg)