Electronics Forum | Thu Jan 03 15:20:02 EST 2002 | Luis F. Otero
What method of depanelization is used to depanelize circuit boards made of flexable ribbon cable material.Any input welcomed. Luis F. Otero (915)-780-5504
Electronics Forum | Thu Jan 03 22:39:37 EST 2002 | davef
For us, it depends on product volume: * Low volume: Tailor's scissors sharpened for the job. * Mid volume: Custom die used in a press. * High volume: We don't do this, but we'd have buy a singulation machine, er something like that. [Search the SMTne
Electronics Forum | Thu Apr 12 15:53:59 EDT 2007 | realchunks
Steve is right. There is a difference between flat ribbon "devices" and flat ribbon "cable". IPC standards are the same for flat ribbon as gull wing. Here's a pic for example: http://www.topline.tv/FLATPACK.html
Electronics Forum | Tue Jul 03 17:40:11 EDT 2012 | ck_the_flip
Ribbon cable is 25 ml pitch (11.8 mil pad-to-pad), and solder is pre-applied and reflowed to the PCB pads. What is the best attachment method for this ribbon cable? What is the best method to prevent solder bridging? Hot bar, soldering iron with "
Electronics Forum | Wed Jul 04 13:28:00 EDT 2012 | davef
Nice picture. What's that snot on the solder in the bottom left of the picture? I'd guess that this ribbon cable wants to be hot bar soldered.
Electronics Forum | Wed Feb 06 06:14:01 EST 2019 | youngbuck
Try changing conversion board. 2 big ribbon cables plug in to it. p./n 00321189. or the 2 ribbon cables may need to be reseated. Thanks, Ryan
Electronics Forum | Thu Apr 12 01:11:12 EDT 2007 | Haris
Gull wing components are name on the pin/lead shape of the ICs like sop, qfp, pqf etc while plcc IC package is named on J-lead componets. Flat ribbon is of cable/wiring type and it is not a component,see this website. http://directory.jimtrade.com/2
Electronics Forum | Thu Jul 25 16:20:59 EDT 2019 | bobpan
Top red led is on or off depending on version of tep board. The green leds light when the transport sensor that it communitcates with is seeing a board over it. Tep controller init failure can be one of the following. 1. Check reseat tep card and
Electronics Forum | Wed Jan 04 11:45:05 EST 2006 | Jeff
Discrete wiring and flat ribbon cabling. Fairly simple cables (connectors include: DF-11, IDC, D-SUB), proper crimping is probably the most difficult concept. But unfortunately is often overlooked.
Electronics Forum | Wed Jul 06 08:02:54 EDT 2011 | jholif
bought the cable replacement kit and replaced all of the ribbon cables and still the deadly motor error 4. Everything in the system has been replaced except the X motor and the Y motor cable.
winsouce.jpg)
