Electronics Forum | Fri Aug 10 10:37:49 EDT 2012 | cyber_wolf
Has anyone out there ever successfully rebuilt a CP642 transmission cooler oil pump ? Any tips or tricks would be appreciated. Thanks
Electronics Forum | Tue Apr 08 08:01:35 EDT 2014 | cyber_wolf
So we had a ringblow pump blow up in our CP642. We replaced it and now we are getting hardware NG errors very intermittently.(2-4 times during and 8 hour shift) I see that the x-motor fan, cam motor fan,and oil cooler are all in this circuit. When i
Electronics Forum | Sat Jan 18 03:18:04 EST 2014 | smtspareparts
Should be too high temperature on somewehere on machine, 1 Check cooling oil tank, If the cooling oil need replaced? Check the radiator of cooling tank, withdraw the filtering net and clean it,and clean the dust off the radiator of cooling tank wi
Electronics Forum | Sun Feb 05 13:41:47 EST 2006 | bvdb
We recently purchased an old Fuji IP-I placement machine and have been testing 8x4 feeders for 0805 parts, etc. I have opened some of the non-working feeders to replace broken pieces and have noticed that some of the feeders are completely clean ins
Electronics Forum | Wed Dec 29 05:58:04 EST 2021 | sophyluo1985
According to the normal theory and the feedback of our other customers, maintenance is divided into 4 ways. (Depending on the environment of your production workshop, the work head is generally inspected monthly) 1. Daily maintenance: Clean the surfa
Electronics Forum | Mon Nov 24 19:21:04 EST 2003 | alwil
Hi, I have seen this problem. Make sure that the peeler tape goes round all three pulleys as in the diagram on the feeder. Make sure the feeder clutch is oil free and not slipping. If everything is set correctly then it may be a component vendor i
Electronics Forum | Tue Nov 15 00:33:42 EST 2022 | frankchan
That is right, air pressure would be a higher level of malfunction and reported on the main screen, maybe also try maintenance of the head, cleaned up and oiled them, anyway I'm speaking of experience based on the old days when I using the Fuji serie
Electronics Forum | Wed Sep 05 12:24:58 EDT 2007 | mulder0990
I have found a torque checker for the Fuji CP6 feeders. It is offered through fuji for a resonable price. The two other factors I have found for problems are the Guide cover not being clean or oil or dirt in the Reel itself. I have not tested the
Electronics Forum | Tue Nov 25 08:15:48 EST 2003 | cyber_wolf
The clutches are brand new and oil free. As I stated above we run newer components as a general rule. I see this happening across different date codes, and different manufacturers. I have tried routing the overlay tape like the diagram on the feeder,
Electronics Forum | Wed Dec 06 17:22:03 EST 2023 | madisreivik
Hello and help ! After changing oil hose, cleaning machine and all nozzles, CP642 narrow camera started to flicker. And in nozzle centering measuring, no image at all. We checked syncro pin, seems ok. Also checked camera picture with Sony monitor,
.png)