Electronics Forum | Wed Sep 12 11:03:35 EDT 2007 | cyber_wolf
Ya I am hip on the caps. These blowers squeel then quit.
Electronics Forum | Wed Sep 12 11:01:49 EDT 2007 | leemeyer
We have an Omni 7. We were having problems where blowers wouldn't start. Turned out to be the start capacitors and not the blowers. I replaced all of the caps and haven't had any issues since.
Electronics Forum | Tue Sep 11 08:36:53 EDT 2007 | cyber_wolf
We seem to have a lot of blowers going bad on our Omni 10 lately. We run PB free and/or elevated sn/pb profiles on a regular basis. I am starting to suspect that the elevated zone temps are causing the blowers to fail. Has anyone else had this prob
Electronics Forum | Wed Sep 12 13:11:50 EDT 2007 | nitro
Usually the bearings lock up. I keep one spare blower on hand and change it out when I have one go bad, then take the bad one apart and change the bearings. The bearings are about $4.00 per set and are pretty common. Not too hard to find. I am using
Electronics Forum | Thu Aug 11 10:21:40 EDT 2005 | leonb
HI all, i have 2 omniflow 5 zone reflow ovens would these be suitable for rohs compliance also 2 iemme 760 reflow oven with 4 upper zone and 4 lower zones would these be suitable also any feed back would really help
Electronics Forum | Mon Feb 28 21:42:27 EST 2022 | emeto
Wow this is 21 years old! Impressive.
Electronics Forum | Fri Mar 04 12:29:04 EST 2022 | stephendo
The Historical Society. 20 years old is antique for technology.
Electronics Forum | Thu Mar 03 20:19:28 EST 2022 | astarotf
If our hard drive had scratches on the data lens, the needle was misaligned and caused the drive damage. The disk cannot be recovered.
Electronics Forum | Fri Mar 04 10:44:54 EST 2022 | bukas
i got 14 machines from 1994 to 2001, where do I apply for medal? xD
Electronics Forum | Wed Mar 02 22:11:30 EST 2022 | travishemen
I have successfully revived a dead hard drive by buying an the exact same model and swapping the circuit board from the new an presumably good hard drive to the drive I'm having trouble with. I have done this twice on hard drives that were between 1
winsouce.jpg)