Electronics Forum | Thu Jul 16 06:24:23 EDT 2020 | indhu
Hi, I recently joined the SMT manufacturing here. I had problem with heavy pallets as it stuck between conveyors. So, I had reduced the pallet thickness by big opening for the pallets. Now, I'm encountering another issue the pallet warpage after refl
Electronics Forum | Wed Jan 06 23:49:48 EST 1999 | Chris G.
| Hey All you Einsteins out there!! | | I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket
Electronics Forum | Tue Aug 26 14:13:46 EDT 2003 | robd
We have seen "coplanar problems" on BGAs supplied by some suppliers. We have seen large enough spere variation to cause opens with our standard .006" paste process (paste and profile work fine "most" of the time) . Although not an extremely technic
Electronics Forum | Thu Jul 15 18:07:04 EDT 2004 | dwanzek
This has been a tough one to date. Any ideas will help. Problem definition � random QFP144 part not soldering all leads. Percentage fallout is about 1-5% of boards. Usually leads, one or more, on trailing side to the direction of travel does not wet
Electronics Forum | Mon Aug 17 02:50:44 EDT 1998 | Bob Willis
| Have an SRT w/preheat, 18 layer board all copper, 456 BGA needs to be removed and replaced. The manufacturer is Chip Express and during reflow it warps up or down. Causing either opens or shorts on the corners. I was using gel flux with multiple
1 |