Electronics Forum | Tue Jul 18 16:40:09 EDT 2006 | dphilbrick
We have a system where when we set up the line to run a job before the first part is placed an auditor verifies we have all the correct parts loaded on the machines in thier correct locations. We then run a first article. The board is inspected to in
Electronics Forum | Tue Jul 18 11:32:40 EDT 2006 | Joris Groot koerkamp
I am wondering what skills operators need to run an smd line itself. At our company they know how the pick&place machine works (refill/ changover), but if there is a problem with wrong placed components they don't known what to do. Our managmenttea
Electronics Forum | Sat Aug 21 11:45:15 EDT 2004 | dror
hello i am a stundent from israel, i work in a smt company, and my assignment is to reduce stup in the smt line. i need a flow chart of the assignment operators have to do during a setup for a pcb manufacture. or any other material i can use to reduc
Electronics Forum | Sat Aug 21 16:29:39 EDT 2004 | Slava
Hi Dror, I also work in Israel in smt field. We get the info from the offline optimizer and arrange it in the following way: element - machine no - f/r - place (for example 100nf - 3F34) Elements are placed in abc order, so it is easier to find it
Electronics Forum | Tue Jul 18 15:47:07 EDT 2006 | Mark
IPC610 training to help verify issues that might arise. Also, the opeators need to know part numbers and descriptions because that should be common knowledge when running a SMT line. Plus, with your comment "At our company they know how the pick&plac
Electronics Forum | Thu Jan 18 22:40:09 EST 2007 | davef
CircuitCAM [ http://www.aiscorp.com ] will probably do what you want. Amoung things, it works great for push lines, where we change the setup depending on the skills of the operators on hand.
Electronics Forum | Fri Mar 14 14:36:46 EDT 2008 | ck_the_flip
So, nobody uses digital camera's huh? Operators like "real pictures" the most. Sure, it looks technical to use a gerber-exported dxf file, bla-bla-bla...I used to do that in 1995... but picture's worth a thousand words......
Electronics Forum | Mon Mar 24 09:45:50 EDT 2008 | johnhburris
You might also want to look @ Blueprint. We do use CircuitCAM for SMT program generation; we've found it's less effective for THT and Post assembly operations. We are also considering on-line documentation; it has shown promise in our final assembly
Electronics Forum | Wed May 31 16:09:14 EDT 2006 | barryg
Did You verify operation of the oscillaators(resonaters) by heating and cooling and looking at the waveforms and frequencies when doing so. We have problems when they are not packed correcttly from vendors , and sometimes they can get crackes in them
Electronics Forum | Thu Jun 02 12:44:13 EDT 2005 | russ
Your inspection people will tell you what they need. We have some that prefer to stand while others sit. It has to do with chair / table / operator heights. e.g. tall table with a short operator they will want/need to stand and vice versa. Usuall
.gif)
winsouce.jpg)