Electronics Forum | Mon Jun 20 16:48:24 EDT 2005 | Steve
Although I am sure that some of the postings here are legitimate, it is obvious that many of them have been written by AOI manufacturers or suppliers. This forum is meant to be a communication channel for process engineers, not salesmen. Please sav
Electronics Forum | Tue Jun 21 09:06:02 EDT 2005 | pci
Although I am sure that some of the postings here > are legitimate, it is obvious that many of them > have been written by AOI manufacturers or > suppliers. This forum is meant to be a > communication channel for process engineers, not > salesm
Electronics Forum | Thu Apr 28 01:30:54 EDT 2022 | sophyluo1985
Achieving high reliability and high efficiency in SMT process (Surface Mount Technology) assembly has always been the goal of electronics manufacturers expecting consistency. It depends on the optimization of every detail of the whole process. For SM
Electronics Forum | Tue Oct 28 06:18:19 EDT 2008 | dominikpeli
Dear Collegs! I would appreciate all responses with opinions about the AOI manufacturers that will be listed below. First of all maybe a short description. In my company we are just starting with the optical inspection of our products. We use screen
Electronics Forum | Sat Jul 16 13:53:52 EDT 2022 | yannick_herzog
Hello all, we use a reflow oven from Rehm in our SMT production. At the moment we solder under nitrogen atmosphere (approx. 500ppm). Now we want to reduce the nitrogen consumption (costs etc.). What consequences can occur here? Especially on the s
Electronics Forum | Mon Oct 19 10:35:31 EDT 2015 | mikekeens
Hi All, What 3D/5D solder paste inspection machines are recommended? I've heard the best are CyberOptics and Koh Young - Has anyone used a 'ALeader' SPI machine? Regards
Electronics Forum | Wed Jan 30 14:11:15 EST 2008 | slthomas
We dodged it for a while but it was inevitable. Here's the question. What do I REALLY need, and does anyone even agree on it? OK, that's *two* questions. The first board we're likely to do has three parts that will need special consideration. One
Electronics Forum | Mon Sep 05 16:24:09 EDT 2016 | davef
inspect => conformal coat ... and standards are aligned with that philosophy. I can imagine doing a good job inspecting assembly after being coated with particular coating thickness, optical properties, lighting conditions. Ultra-thins are so thin
Electronics Forum | Thu Oct 07 03:19:33 EDT 1999 | Chris May
| Our first article inspection after machine placement can take several hours depending on the complexity of the board. The operator visually checks the board against the drawing and bill of material. I'd be interested to hear if there are any other
Electronics Forum | Thu Nov 08 10:26:12 EST 2007 | slthomas
"1/2 of the paste volume is lost from the flux and carriers being removed during the reflow." Don't forget the intersticial space between your solder spheres that you lose during reflow. Not being of an engineering background I couldn't begin to a
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936