Electronics Forum | Wed Nov 05 20:40:43 EST 2003 | jersbo
Without knowing your requirements... here is a safe bet.. 8mm feeders will typically be your biggest user followed by 12mm then 16mm then 24mm... ect... apples to oranges ? 100 8mm 25 12mm 12 16mm 10 24mm is a close ratio.... as others have stated yo
Electronics Forum | Tue Apr 01 07:45:55 EDT 2008 | aj
Hi, We use the standard pin supports when necessary. Are your boards very thin i.e less than 1.6mm ? or maybe panelised ? Other things to check are Z0 placement height aswell as damaged nozzles,sticky nozzle/nozzle head , poor feeders along with t
Electronics Forum | Mon Nov 26 16:07:56 EST 2012 | jerlong
Greetings, Does anyone know where to find a tape and reel flatness specification? Looking at the EIA 481-B standard, there is no reference to the tape flatness (the images shown may "imply" flatness from one side of the tape to the other, However I
Electronics Forum | Fri Jul 17 07:45:28 EDT 2020 | spoiltforchoice
Electronic feeders are faster, more accurate & fully programmable. Potentially (although they don't always make it possible) they mean you don't need dedicated feeders for 2mm pitch or at the other end can do 4,8,12&16mm using the same unit. The feed
Electronics Forum | Tue Apr 14 11:43:30 EDT 2009 | rmitchell
Hi, We are considering adding on to our SMT line. Our current line is CP65, IP3 and we would like better placement on our 0402's and 0201's. We were looking at the NXT, we would need larger pcb table to match our other machines. We probably only nee
Electronics Forum | Mon Oct 24 14:57:09 EDT 2022 | spoiltforchoice
Indeed, back in 2010 or so I had quotes for a MY100 with a Hydra head,as part of that I did get them to run a theoretical build time for one of our own boards. That came back @ just under 7k cph, it was a pretty sensible board with a nice range of th
Electronics Forum | Thu Jun 29 23:39:25 EDT 2006 | grantp
Hi, Oh, never noticed this old comment, but now the threads been revived i can comment. I have actually owned three MYDATA machines over the duration of the last 6 years, and they all had accuracy problems. It depends on what your doing, but we got
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Fri Apr 30 10:42:40 EDT 2021 | oxygensmd
I have a customer who ask close to prototyping jobs with low volume and high-mix components. A regular job have around 5-30 pieces board but have high quantity and many type of components. All the time over 1000 pieces of parts on board from 250-350
Electronics Forum | Sat Apr 28 21:13:11 EDT 2018 | stephenj37824
So lots of quotes and research later we have eliminated a few added a few to our choices lol. So it looks like we will be doing a decent volume now (due to our other board supplier letting us down as well). Roughly 4-5 million leds/connectors per mon
.gif)
winsouce.jpg)
