Electronics Forum | Sun Mar 06 20:08:38 EST 2005 | mrduckmann2000
Davef, You have a good question. If we had perfect design engineers out there that would use the proper component spacing and not put SMT parts between and around thru-hole parts - glue and wave would work perfectly. I have done this with great su
Electronics Forum | Tue Aug 21 19:24:15 EDT 2012 | rway
Checksum will work if all your doing is analog/passive testing. Checksum systems do not have digital test capability. I would recommend a Teradyne z18xx system. We use 8 of them in our plant and have been for years. Used, these systems range from
Electronics Forum | Thu May 23 05:38:26 EDT 2019 | je_arrow_tech
We have been having some issues recently with a TSOP-II 54 pin, where upon second reflow the part will lift at end one, most of the time the solder will pull up with it and still connect but I still worry about strain on the component as well as it i
Electronics Forum | Wed Dec 29 05:58:04 EST 2021 | sophyluo1985
According to the normal theory and the feedback of our other customers, maintenance is divided into 4 ways. (Depending on the environment of your production workshop, the work head is generally inspected monthly) 1. Daily maintenance: Clean the surfa
Electronics Forum | Wed Oct 29 13:53:52 EDT 2008 | andrew_11
Hello Reese, I had an opportunity to look at the Yestech B3, Mirtec MV-3 and the Landrex Optima. Although I was looking at Desktop AOI Systems, Landrex was very persistent in getting an in line system in front of me at the time. The first machine I
Electronics Forum | Fri Feb 11 10:14:54 EST 2000 | C.K.
Dave, to answer your questions, point-by-point: � Just out of curiosity, how are second side, skippy components oriented on the board with respect to the wave? The SMD's are all oriented in the "correct" direction with respect to wave direction(i
Electronics Forum | Mon Aug 02 22:04:45 EDT 1999 | K Simpson
| HI EVERYONE, | WE JUST BOUGHT 6 FCM MACHINES AND ARE HAVING | A NUMERIOUS AMOUNT OF DOWN TIME COMPARED TO | OUR 5 LINES OF FUJI EQUIPMENT.IS ANYONE HAVING | BAD EXPERIENCE WITH PHILIPS FCM ETC? | | WHAT PROBLEMS ARE YOU HAVING? | KEVIN | KEVIN
Electronics Forum | Tue Nov 04 10:47:54 EST 2008 | rway
Thank you all for the great responses. We to looked at tne Mirtec before settling on the YesTech. I felt the machine software was better structured and organized and the system caught more faults on our "broken" board than the other system did (We
Electronics Forum | Tue Jan 25 14:25:47 EST 2000 | Mark Miller
Has any one experienced hand soldering through hole components to white tin plated PCB's using no-clean wire solder? Our facility is presently evaluating white tin vs Sn/Pb coatings. Our only difficulty at this time has been hand soldering of wires
Electronics Forum | Thu Jun 24 18:24:13 EDT 1999 | Christian N.
| Dear guys, | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are now usin
