Electronics Forum | Wed Jul 11 22:44:50 EDT 2012 | joeion
Why cannot reply????
Electronics Forum | Wed Sep 23 09:21:53 EDT 2020 | dimamalin
first of all checking feeders
Electronics Forum | Thu Jul 20 23:44:41 EDT 2006 | reypal
Thanks Darby for your comment and absolutely agree with you. What we are trying to define here is a KPI for throw out. but before that, we need to get a guideline or standard as reference. in this case, if no any industry standard then we can use cur
Electronics Forum | Wed Aug 23 02:48:11 EDT 2006 | ec
Hi, Appreciate someone could advise or forward a format to me how to work out number of pallet needed for wave-solder if the machine speed is at 1.0m/min, volume per month is 4500 sets, pallet length 0.3 meter, conveyor length 5 meter...... Looking
Electronics Forum | Tue Aug 04 23:23:01 EDT 2009 | gopang
I have problem with my Panadac 770, the problem no out Put 5v, i was check : 1). Change SMPS in panadac 2). Change terminal cad 3). Change Transistor 2SC2200 4). Change transistor 2SD867 Please conform to me if have solutions and some body have wir
Electronics Forum | Mon Jan 10 11:08:39 EST 2005 | mrgman9999
We are having a problem with popcorning of a plastic BGA that has been under careful humidity control. We have had problems in the past and some have been related to too much trapped internal solvents from the die attach epoxy. We did a life time b
Electronics Forum | Fri Jul 06 05:28:59 EDT 2012 | jsolloway
..... that's very strange. If there were any risk of de-lamination then it would of occurred during the reflow process, surely. Unless the through hole department are using heat guns or wave sodler? I doubt if the sales or planning team are happy if
Electronics Forum | Fri Jul 13 08:03:54 EDT 2012 | cobham1
I appreciate all the feedback. The reason I was asking the question is because we have an internal documnet that states we need to bake for 16 hours after the boards are cleaned. This just seemed to long for what little moisture is really removed. I
Electronics Forum | Sun Mar 25 08:45:00 EDT 2018 | jacobidiego
Normally some random components of size 0604 or below and may be due to a thermal mass being close like a transformer or AC electrolytic caps. We tried changing fan speed, but this will change the thermal profile and avoid the thermal mass from bein
Electronics Forum | Tue Feb 22 17:03:48 EST 2000 | Chris
Dek 249 and Dek 260 models use to have fiducial recognition where table would adjust to the stencil. However, I would still recomend you buy an inline model because the change over will be much faster. Probably 10 times faster.