Electronics Forum | Thu Feb 01 08:47:07 EST 2007 | davef
NASA is concerned about outgassing in high-vacuum environments. They select materials to minimize outgassing. http://outgassing.nasa.gov/og_desc.html
Electronics Forum | Mon Jun 15 13:23:16 EDT 1998 | Bob Willis
| We are very concerned about outgassing in wavesoldering. | If anyone knows how to use properly well pcb's before soldering in order to avoid this problem please let me know. I have this problem in FR4 large double sided pcb's. My soldering line is
Electronics Forum | Sat Jun 13 07:22:13 EDT 1998 | Toni Casas i Pujadas
We are very concerned about outgassing in wavesoldering. If anyone knows how to use properly well pcb's before soldering in order to avoid this problem please let me know. I have this problem in FR4 large double sided pcb's. My soldering line is SOLT
Electronics Forum | Sat Jul 25 08:47:25 EDT 2009 | davef
Both "moisture content of bare board" and the "thickness of the copper plating in the PTH" are related to each other. As you heat the solder connection, moisture in the board boils and out-gasses through the solder connection. Plating with the proper
Electronics Forum | Fri Dec 11 08:56:08 EST 2020 | SMTA-64304223
One of the common causes of solder ballin is also outgassing from the boards have your tested the board for outgassing? Bob Willis
Electronics Forum | Fri Nov 17 09:24:33 EST 2006 | Brandon
Thanks Russ. I have contacted the board house. Will post results later.
Electronics Forum | Wed Mar 21 16:32:03 EST 2001 | mparker
The root cause is dependant on the type of solder "splash", ball, whatever, that you are seeing post reflow. If it is smears, then cleaning the stencil underside is probably the answer. Are you using automatic wipers? How many print cycles between w
Electronics Forum | Sat Jun 13 11:00:21 EDT 1998 | Earl Moon
| We are very concerned about outgassing in wavesoldering. | If anyone knows how to use properly well pcb's before soldering in order to avoid this problem please let me know. I have this problem in FR4 large double sided pcb's. My soldering line is
Electronics Forum | Mon Apr 12 22:22:01 EDT 2004 | davef
Large voids are common in via in pad [seach the fine SMTnet Archives for earlier laments], especially in blind via. Observations on your via out gassing theory: * If the copper plating on your via is GT 1 thou, there will be no outgassing from the
Electronics Forum | Wed Sep 17 03:15:40 EDT 2003 | Daan Terstegge
Are there via's underneath the Tantalum, closed with soldermask on the other boardside only ? I've had a situation recently where a chip resistor was blown away by the outgassing of via's under a Tantalum. The presence of the Tantalum caused the vap
