Electronics Forum | Mon Jan 19 14:54:38 EST 2004 | cyber_wolf
How did you come to the conclusion that you are having a cold joint problem. Just by appearance ? As Dave stated if you have any of the metals that he listed in the joints they will appear to be dull and grainy sometimes. But... Dave, I will have t
Electronics Forum | Thu Mar 11 21:36:51 EST 2010 | davef
Poor man's approach to assessing coplanarity issues: * Get two pieces of 2X4 wood that are the same length, about three inches long * Cut the end of one of the pieces at a 45* angle, so that the 45* angle cut leaves a face on the four inch side of th
Electronics Forum | Mon Sep 26 20:10:58 EDT 2005 | Anna
What type of alloy and at what temperature do you use for wave soldering? Do you need to modify your machine? I am using SCN but I have problem controlling my bath. Are you running on multilayer board or PTH boards? Do you face any fillet lifting
Electronics Forum | Thu Feb 15 20:27:11 EST 2007 | vshan
Hi Chris Good Day!!!! well we are running flex panel(150x270) with one connector(3 pin legs both sides) insert. Each panel consists of 28 parts and its used for disk drive industries. We are having a pallet to support with the top cover design such
Electronics Forum | Tue Sep 07 15:28:13 EDT 1999 | Earl Moon
Listed below are the issues Viking has been experiencing since the installation of the Proflow Head: 1. After installing new 350mm Wiper foil with metal strip glued on it, It worked for about a week and suddenly metal stri
Electronics Forum | Wed Sep 08 08:25:26 EDT 1999 | Brad Kendall
Listed below are the issues Viking has been experiencing since the | installation of the Proflow Head: | 1. After installing new 350mm Wiper foil with metal | strip glued on it, It worked for about a week and suddenly meta
Electronics Forum | Mon Jun 07 12:22:44 EDT 1999 | Chrys Shea
| I'm encountering a new problem at my new company that I haven't encountered before in my past life - and that's Wave Soldering VIA holes. | | We've been getting a rash of defects that we call in this company, "insufficient solder in VIA hole." The
| 1 |
