Electronics Forum | Sat Feb 15 10:25:50 EST 2014 | jdengler
Can the oven do 400C? If so do them in the oven. Jerry
Electronics Forum | Thu Feb 13 08:08:41 EST 2014 | cyber_wolf
The manual says to bake the edge chains at 400C to clean them. Is anybody doing this ? I need to take my edge chains to a heat treat facility to clean them ? I don't want to spray oven cleaner on them as they appear to be plated with nickel or so
Electronics Forum | Thu Aug 19 13:29:43 EDT 2004 | davef
Things we�d like to have in a reflow oven are: * Small variation in temperature [+-2*C] from rail-to-rail. * Consistent temperature over time [3+ sigma]. * Thermal inertia / fast recovery to be able to respond to the effects of high mass boards. * Ra
Electronics Forum | Wed Jul 01 09:46:06 EDT 2015 | asifjaleel
Hello Evtimov, Thank you for your reply. I have received the quote for the BTU Pyramax. How about the preventive maintenance compared with other ovens in the market..?
Electronics Forum | Tue Jul 14 01:48:43 EDT 2015 | buckcho
Hello. I used Heller before - very stable oven, I had zero problems. Maintenance is also very easy. I also think they are not so expensive. You have to look at the power consumption and N2 if you are going to use it. Some ovens can trick you with low
Electronics Forum | Fri Jun 26 10:33:08 EDT 2015 | Asif
Hello Professionals, Good morning, We are circuit card manufacturer for the Aerospace industry with low volume and High mix level. We have a plan to Purchase a NEW REFLOW OVEN. Currently we are using Electrovert BRAVO reflow oven which is about 8 yea
Electronics Forum | Fri Sep 07 09:25:22 EDT 2012 | donkudner
We are planning to purchase two new reflow ovens. I would like to take an unofficial reliability survey. Could you list your reflow oven model / age (yrs) / number of unplanned maintenance events in the last year? Example: BTU VIP98/2001/8
Electronics Forum | Tue Dec 01 17:50:43 EST 2009 | swag
This is cut and paste from a Conceptronics Document - hope it helps you: Following are the lubricants recommended for oven maintenance: 1. To lubricate the conveyor chain use: A. Biral BIO30 -synthetic high temperature oil (highly recommended)
Electronics Forum | Mon Feb 11 17:30:59 EST 2008 | blnorman
The solder problems that were created caused overcompensation. Plus our PM schedules could be monthly, could be yearly depending on the maintenance crew for a particular line.
Electronics Forum | Mon Sep 10 08:51:43 EDT 2012 | donkudner
How often do you have to replace the blower motors? I will ask the oven manufacturers what the average MTBF is for their blowers. We have numerous BTU's and I don't think any of them have required replacement before 8 years (single shift). Once they
