Electronics Forum | Fri Mar 22 13:16:04 EST 2002 | dougt
We place parts like this with a contact systems machine (3Z). The part comes on a reel and has a flat top on it (as mentioned above) that can be removed as soom as it comes out of the oven.
Electronics Forum | Wed Jul 13 14:50:29 EDT 2005 | rameshn
Dear Sir, We are manufacturing Computer Motherboards & Networking products (which are having 2 to 3 BGA Chips onboard) in our plant. we are having 2 nos of HELLER 1800W model Reflow Ovens. this model reflow oven is having 9 heating zones at both top
Electronics Forum | Tue Mar 31 09:58:29 EDT 2015 | dazdoc1977
Hi Robgd3 for CEM work this task is a doddle especially when I had line manager software at my disposal....This is like pulling hair, If I have worked out how quick my machine can place a certain comp and then match that to the BOM it should give me
Electronics Forum | Tue May 04 10:59:23 EDT 2004 | Evtimov
Hi, It depends of your boards(are they for SMD or not) and how many boards you assemble. The process at all is like that: 1.Stencil printer - to adjust the paste 2. Pick and place machine(for your quantity) 3.Reflow oven Theese are the machines you
Electronics Forum | Mon Jul 18 02:47:27 EDT 2005 | grantp
Hi, It sounds like your a little new at profiling, and can be difficult to do well. We purchased a KIC profiler that has software that will take your profile data and tell you the best oven temperature settings and conveyer speed to use. You need
Electronics Forum | Fri Nov 12 13:07:45 EST 2010 | G8reflow
Hi, The focal point of my research has been to recommend a reflow oven and develop a process for a small to low-medium production SMT soldering with the following considerations. - Lead-Free - Low to low-medium production - Forced Convection reflow
Electronics Forum | Sun Feb 07 10:41:16 EST 2010 | davef
Makes us wonder how well the connections on the component match with the pads on the board.
Electronics Forum | Mon Feb 22 10:21:58 EST 2010 | mystkldy
We did the firt 2 with no luck.
Electronics Forum | Mon Feb 22 10:01:01 EST 2010 | jtsyeung
Since the inductor is electro-magnetic, that means the device is composite of coil and ferrite metal. The inductor inside the reflow oven meets with blower motors which close to the inductor and generate magnetic field. With such conditions, Lawren
Electronics Forum | Sat Feb 06 16:28:09 EST 2010 | mystkldy
I have some large ROHS SMT inductors that are moving during the reflow process. I have tried adding extra solder, gluing and doing both. I don't know what else to try, any suggestions?
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694
