Electronics Forum | Thu May 24 17:37:25 EDT 2007 | jmelson
I did one batch of low-density (0805 and standard SO chips) with excellent results. I then spent some time figuring out how to calibrate the mechanical alignment station (most of the calibration offsets on this machine were either zero or several mm
Electronics Forum | Fri May 09 00:18:42 EDT 2014 | tuanly
To all experts in house, If by chance any one can tell me where to buy or down load the Owner Manual /User guide book for Quad -QSP-II SMT machine. Or step by step instruction how to teaching board Fiducial on this Quad QSP-II. Thank you all in adva
Electronics Forum | Sun May 11 17:32:23 EDT 2014 | bobpan
I have a procedure on teaching fiducials on the machine with and without cad. The manual does not tell you how to do this. Give me an e-mail address and i will send it to you. Thanks
Electronics Forum | Tue Jul 10 13:01:02 EDT 2018 | john22hendy
Looking for any Preventative maintenance steps for SMD storage towers. The MyCronics Owners manual does not specify PM suggestions, however proper vacuuming, lubrication and lens cleaning is necessary. Does anyone have other items to suggest or a li
Electronics Forum | Thu Sep 13 00:13:43 EDT 2012 | vikings
I recently purchased two used manual pick and place rotary carousel machines. They did not come with any literature and I've searched Google, this forum, and a few others with no luck. Does anybody know where I could find the owners/operator manuals
Electronics Forum | Fri Aug 07 19:05:11 EDT 2020 | glasscake
I was told by Mirtec I could not get any manuals without buying the second owner support. I have a simple manual that goes over making a program, creating parts. That manual covers using the Mount inspect, IC inspect, Chip inspect tools but nothing
Electronics Forum | Wed May 30 21:00:53 EDT 2001 | davef
I'll pass on the "eternally grateful" stuff. A frosty at Jimbo's will do just fine. Go to the sites of the manufacturers of your equipment. Many have on-line manuals. Generally, access to these documents is limited, as you'd expect, to registered
Electronics Forum | Fri Sep 06 10:27:42 EDT 2013 | nophsem
Hi bobpan! MOD CODE 69 is "Waffle Tray Handler Installed Flag" and default setting 0. That's what mode code quick reference table says (the reference table that I've to respect according to the previous owner). And it's different what manual says (M
Electronics Forum | Wed Jul 01 05:33:29 EDT 2020 | zsoden
I recently purchased a used MPM UP2000 printer that I'm getting up and running. It's in very good condition and other than a worn out auxiliary on the main power contactor seems to be all working correctly. I've got it operating in demo/dry run mode
Electronics Forum | Mon Oct 04 15:01:18 EDT 2010 | lfaustini
Hello, I am the owner of a Zevatech FS-710 that I now want to put into production. I bough the unit at auction, and it had no documentation whatsoever. If anyone out there can e-mail me any .pdf's or anything for me to even begin to get familiar w
