Electronics Forum | Tue Apr 14 11:33:44 EDT 2009 | dyoungquist
I have the raw gerber files used to manufacture a bare pcb. I do not have the pick-n-place file giving the locations of the surface mount parts on the pcb. Does anyone know of a software program that can take the gerber files and generate a pick-n-
Electronics Forum | Wed Aug 14 18:17:32 EDT 2019 | slthomas
We are down to the last few unresolved PCBA test failures in a work order and scrambling to get them repaired and into a mechanical assembly. What we have found in quite a few of these cases are cracked 1206 MLCCs. The failed parts are all the same
Electronics Forum | Sat Feb 14 12:25:37 EST 2004 | I ramos
I populate several thin panels (0.032")using a > Samsung S-2000 P-N-P machine. With panel sizes > of 8" by 10", it is very difficult to clamp the > panels into the machine with deflection and > bowing. Also, the Samsung makes it very difficult
Electronics Forum | Wed Jul 08 23:07:18 EDT 2020 | tylerrobertson
Hello, Trying to re-purpose a QUAD feeder for delivering small parts to a scada robot. Wondering if someone could help me out with a pinout for the connector. it's 8 pins Feeder is p/n 12/10-23959B SSA Was able to get the board to power up and flas
Electronics Forum | Tue Nov 09 10:44:13 EST 2004 | russ
I guess i might want to throw this in for future reference. After speaking with our board supplier he states that this mask is fully cured when it reaches approximately 180C. I beleive this since we usually probe the repaired area after putting the
Electronics Forum | Wed Sep 06 11:08:09 EDT 2006 | Shep
I'm using an EKRA X5 printer. My QC department has been rejecting boards for "fibers" in solder joints. After investigation, I have determined that the fibers are coming from the stencil cleaner paper. I'm using JNJ Industries p/n 5404EK paper. A
Electronics Forum | Wed Dec 17 09:17:53 EST 2008 | caldon
Hi Matt, Please help us understand what you are trying to do with the dual monitors. If my memory serves me correctly the PC on the P-N-P is mostly used as data storage. The vision system including component cameras, fiducial cameras and bottom visio
Electronics Forum | Thu Nov 14 18:06:05 EST 2019 | tey422
It doesn't really matter which PnP machine you use. The correct way to cut down the variety is to use the same mfg p/n part for the whole time. Some would try to cheap by increasing the part size tolerance, but that's not the right way to do it. To
Electronics Forum | Fri May 27 14:22:47 EDT 2022 | proceng1
I am not exactly clear on what you are looking for. From my customers, assembly drawing notes are assembly specific. If there is hardware, they might include the stack-up. If we are conformal coating, they usually indicate keep-out areas. If an LED
Electronics Forum | Thu Sep 18 15:29:59 EDT 2003 | Gabriele
Hi all, by reading along those thread (SOT23) and Tan outgassing I learned plenty of things. My first time approacing this kind of Q$A Forum, very intesting tech communication way. Any way, the path of magnetism effect was chosen when time ago we met