Electronics Forum | Thu Jan 16 16:15:27 EST 2003 | billg2753
I have received a few boxes of fully assembled boards that have damaged packaging boxes due to rain water. There is visible moisture inside the ESD bag. I have no idea how long these boards have been exposed to moisture. Does anyone have a procedure
Electronics Forum | Fri Oct 11 05:49:16 EDT 2002 | jason
Hi, Recently I am given a task to perform a drop test on a cardboard tote box. Inside is 180 pcs of assembled PCBA with cardboard dividers. But it was unable to withstand the drop test and thus the some of the boards are damaged. Does anyone ha
Electronics Forum | Mon Dec 08 16:47:50 EST 2008 | pwilson1
Hi All, Does anyone know of a method (automated if possible) for removing cured Conformal Coating, silicone based, from plastic?? I m looking into a method of cleaning our internal packaging (mainly plastic boxes etc), which have cured sil
Electronics Forum | Fri Jun 26 04:14:27 EDT 2015 | JB
It is only available in the trimmer package, its a tick box, not sure exactly how it works but it just does a rough check of the part, not very good for fine pitch / very high accuracy needed.
Electronics Forum | Fri Jun 25 18:57:21 EDT 2004 | Pete
One word of caution, depending on the complexity of the boards and package, the Xray on Jewel Box may not be powerful enough to show the voiding defects within the solder sphere. We ran a board side by side against a high end system and find that out
Electronics Forum | Sat Aug 12 09:29:58 EDT 2000 | Dave F
Barry: We use motion detectors: * In our product packaging to determine if the shipper has drop kicked the box down the stairs. * Along our conveyors in production to sense a "line full" These are far different applications and probably far diffe
Electronics Forum | Mon Jul 23 00:59:18 EDT 2001 | mugen
Dave. F. Hmmmzzz.... Thats interesting, coz as a contract manufacturer, we try to optimize processes asmuchaspossible.... simple...yeah! that's the word "Simplify".... We found that if you layout a production line, assume x10 operators, and one si
Electronics Forum | Mon Jul 23 01:00:40 EDT 2001 | mugen
Dave. F. Hmmmzzz.... Thats interesting, coz as a contract manufacturer, we try to optimize processes asmuchaspossible.... simple...yeah! that's the word "Simplify".... We found that if you layout a production line, assume x10 operators, and one si
Electronics Forum | Fri Aug 30 11:53:12 EDT 2002 | genny
Possibly this is tarnish? Silver finish requires a bit more care in handling or packaging - to avoid contact with sulphur which may cause tarnish. Some cardboard boxes gas out enough sulphur to cause a problem. Possibly look at your method of stora
Electronics Forum | Mon Jul 01 08:06:22 EDT 2013 | sarason
There is my shareware package PCBSynergy https://pcbsynergy.com It doesn't do spliting out of the box but you can split the file in Excel and then re-import. All up board prep less than 5 minutes. There are also quite a few commercial packages suc