Electronics Forum | Fri Sep 16 12:58:49 EDT 2005 | vikkaraja
Fuji sells a PAM kit. It includes all the needed things you will need to accomplish this. It has a reel of 1206 black colored chips, doule sided tape, PCB, flopy with PAM program , and a ram card for the particular machine. I hope it help you some. G
Electronics Forum | Tue Apr 08 18:15:14 EDT 2003 | kent_peterson
Running the PAM board is a great tool. Using another machine to get you CPK is very inportant. We use the DT651 which does everything the PAM rom card does plus it gives a CP and CPK value. You can also use it to verify feeders in the X and Y. SMT re
Electronics Forum | Fri Sep 16 12:52:13 EDT 2005 | timekey
Steve- Depending on which Fuji model you have, Fuji PAM either needs to be purchased from Fuji or if you have a CP-7, CP-8 or NXT, Fuji PAM is already installed in the machine from the factory. The kit...if you are required to purchase it from Fuji i
Electronics Forum | Sun Jan 29 11:54:06 EST 2006 | johnw
Hi Dax you want to run a cal card with good cad data on all machines then take the results and then alter the placement xy data to pull all machines into calibration. But make sure all the cameras are calibrated and the pam results are good and withi
Electronics Forum | Tue Mar 04 10:50:25 EST 2003 | ggspook
Hi Mike Interested on your thoughts about (Pam) Placement Accuracy Measurement I am looking into establishing Accurate repeatability of my equipment we check our calibrations Regular and the calibrations are in spec but this does not guarantee
| 1 |
winsouce.jpg)
.gif)
