Electronics Forum | Thu Oct 22 15:25:05 EDT 2020 | gabriel1blue
Thank you for your help. I did purchase one of those emulators but didn't work for some reason. Is there maybe a different setting on the jumpers? I will try again with the software you recommend and hopefully that does the trick. Gabriel
Electronics Forum | Thu Oct 22 22:08:35 EDT 2020 | gabriel1blue
The one difference is that the one from my machine has a 26 flex cable and gets the 5 volts from it as well, not an external source.
Electronics Forum | Fri Oct 23 05:15:47 EDT 2020 | gabriel1blue
My floppy drive is different. https://youtu.be/egS7fn3RweM This looks like something I need to try.
Electronics Forum | Thu Oct 22 21:20:41 EDT 2020 | compit
I have installed these https://pl.aliexpress.com/item/1586956574.html?spm=a2g0s.9042311.0.0.64075c0fte25Rn in Assembleon Topaz-X (Yamaha YV100X) and Emerald-X machines and they work fine.
Electronics Forum | Thu Oct 22 22:13:20 EDT 2020 | gabriel1blue
I got new belts for the original floppy drives and installed them but the machine was reset to Japanese and after changing it back to English the drives are not running or powering up even though we can measure that the 5 volts are coming into it. I
Electronics Forum | Thu Oct 22 22:16:32 EDT 2020 | kumarb
The flat ribbon cable for the floppy drive is keyed and respectively, the RED STRIPE denotes pin # 1 on the Floppy Drive Connector. Do check that that is correct. As a simple test, remove the floppy drive and power up without the drive connected. D
Electronics Forum | Fri Oct 23 05:02:34 EDT 2020 | gabriel1blue
I change the settings to match another machine we have and that actually got the original drives working after replacing the belt. I ordered an adapter that will connect to the 26 pin flat cable and adapt to a 34 pin connector and pull the power from
Electronics Forum | Wed Oct 21 00:37:36 EDT 2020 | gabriel1blue
Has anyone been able to replace or upgrade the floppy drive for this old machines? I tried floppy drive emulator but have not been able to make it work. Floppy drive are old and have many problems anyway and would prefer to change it to something new
Electronics Forum | Thu Oct 22 14:37:27 EDT 2020 | kumarb
Hi. Did a similar update to our Emerald-X (YV88X) and the USB Floppy Drive emulator works like a champ! Installed within a few minutes with 100% success. Way more elegant than 1.44M floppies. Can you share more details on the FD Emulator you have so
Electronics Forum | Fri Sep 12 09:21:59 EDT 2003 | Gabriele
Yes for sure you can use MV2F feeder on MV2VB, the only difference is MV2VB feeder have better design (more robust)then MV2-F type. For sure you have to take care do not mix "K" type with "Q" type feeders who are not compatible among them. Ciao.....
Buy and selling used smt，semi， Robot ,CNC and all used machines
Equipment Dealer / Broker / Auctions
DONGGUAN HUMEN
Dongguan, 30 China
Phone: 13560819457
