Electronics Forum | Thu Mar 14 17:28:35 EST 2002 | stepheno
I worked with Fuji CP6 where one of the techs wanted a minimum of part data's. He was used to working with panasonic machines. We would get resistors broken in two if the part data was too small and parts flying off the board if the part data was t
Electronics Forum | Fri Mar 02 16:06:36 EST 2007 | peterson
Mydata machines are very solid. They are always upgradable since the base machine is essentially the same. Recent advancements in camera and feeders have increase placement speed. However, this is generally not the machine you would select and expect
Electronics Forum | Mon Feb 13 09:34:45 EST 2012 | pr
I am new to the company but the story sounds the same. We have a new board coming in (with CREE LEDS) and I wanted to get in front of it, and found these nozzles. We are going to try them out as soon as we get the spending O.K. They are designed for
Electronics Forum | Tue Aug 21 06:26:26 EDT 2012 | headlad
I've had a CM202DHU since new (10 years) and it is a very reliable piece of kit. I wouldn't be happy placing 0201's but if you use 110 nozzles it is capable. Just make sure that you always line up the feeders prior to running or all you'll here is mi
Electronics Forum | Sat Apr 28 21:13:11 EDT 2018 | stephenj37824
So lots of quotes and research later we have eliminated a few added a few to our choices lol. So it looks like we will be doing a decent volume now (due to our other board supplier letting us down as well). Roughly 4-5 million leds/connectors per mon
Electronics Forum | Tue Jan 08 16:12:57 EST 2019 | cbeneat
We are using material control, and our auto support pins are from Quik Tool. They integrated there modules into our machines, we're happy with it. Not using auto changeover as far as I know, I stick to the maintenance side. We have a programmer that
Electronics Forum | Mon May 16 17:47:53 EDT 2022 | proceng1
Also, be sure that the board support is good. If you have any area of the board with less support, and it bounces a little when placing the LED, it may seem like it's randomly not placing correctly, and so any Z-depth or blow-off tweaking you do wil
Electronics Forum | Tue Mar 20 09:31:09 EDT 2012 | fredc
Chris, You asked if others are having these issues. I know for sure they are. I am not with Count On, but we make nozzles also. Cree has published drawings of the recomended nozzles in their "Soldering and Handling Guides" for several years. We made
Electronics Forum | Tue Sep 28 09:16:10 EDT 1999 | Wendy Casker
| | What selective soldering products should I use for a low production rate, high-mix product line? I am looking to get rid of some hand soldering. I have seen exselect (selective soldering pot method), pillarhouse (small flow solder nozzle with rob
Electronics Forum | Thu Jun 06 07:53:51 EDT 2002 | Jim M.
Has anyone had much luck Picking and Placing die with a Panasonic MPA-G3?What special setups or considerations are required? Currently we pick and place one die with our Universal GSM using only one nozzle. The nozzle must be painted white in order
.png)
winsouce.jpg)