Electronics Forum | Tue Feb 27 05:54:19 EST 2007 | m7mdshms
I want to replace my FDD with a driver to read flash memory instead of Floppy disks, but uses the ordinary floppy interface on pc mother board
Electronics Forum | Thu Sep 18 17:52:49 EDT 2008 | mi
Mydata has Utility menu to "export" panel, layout, into a file, etc. And we have an Excel macro that converts all the data in this file into rows of records for each components; and save this to MSDOS csv file format giving: X,Y,Z,P/N, reference de
Electronics Forum | Mon Aug 20 16:54:58 EDT 2007 | vervin
Yes you can..... You have to be administrative mode. First set of menus on the screen after machine boots up. You can copy the file to a floppy disk which will convert it to ASCII format. You can then pull in up in word and alter however you want and
Electronics Forum | Fri Jul 19 13:19:25 EDT 2019 | BigFuji642
I have not imported the data to Flexa yet. I will have to find a floppy drive. You mentioned below converting the proper data using a MCS. I thought MCS stood for Machine Communication Server. Does it mean something else? How do we convert it us
Electronics Forum | Fri Aug 26 10:55:31 EDT 2022 | kumarb
a DOS USB stack will be required. If Windows -> the USB driver for this device will be required. If Juki has a custom OS then even less of a chance of a success. In all cases, you are introducing far too many layers of unnecessary software that is d
Electronics Forum | Tue Sep 16 09:26:26 EDT 2008 | mi
Hello, I have programmed SMT placement for Mydata My9 machines. I have ported programs between Mydata-to-Mydata machines. Also from Mydata to AOI machine for SMT inspection. Is there a way to port a placement program from Mydata to Panasonic MSH2
Electronics Forum | Tue Sep 20 02:39:43 EDT 2005 | Lasse H.
Hallo again Base... Thanks for your answer... I've been following up, but with no luck... I've been on http://www.assembleon.com and been trying the Cad2Cad Express but I haven't got any luck in converting the dxf, or dwg files to some useable txt f
Electronics Forum | Mon Apr 08 13:09:48 EDT 2013 | microaide
I have set Maximum Sequence Steps Per Program Segment to 450 and Maximum Placements Per Program Segment to 200. I have two Quad IVc machines, with a separate central controller in each one. One machine has a waffle feeder and will have vibratory feed
Electronics Forum | Tue Oct 20 17:30:15 EDT 2009 | rodrigo
Hi all, We use the IMF converter (and a floppy disk) to move programs to and from the MCS30. The only way to get to the command line in the MCS30 is to reboot and do the ctrl+shift+_ ketpresses. I wanted to try to add an entry to the Fuji User inter
Electronics Forum | Sat Sep 21 17:38:31 EDT 2013 | rmitchell
A PC or computer? Just kidding. Years ago, when I was young you could use a floppy disc and transfer the ascii files at your PC to the disk and then convert them to binary Fuji format on the MCS-16 and MCS-30. You may have to format and then prepa
