Electronics Forum | Thu Feb 26 10:26:57 EST 2004 | KenM
I am trying to find a source for a flat conveyor belt for an old post wave flat belt conveyor at a reasonable cost. Any ideas would be appreciated.
Electronics Forum | Thu Mar 04 12:49:56 EST 2004 | haviland
Good morning. We have available several decline and several flat bed belt style exit conveyors, including a couple w/ cool down fans above the belt, e.g., a Kanetic48" OAL w/ 18" wide belt plus (8) fans priced at $1,000.00 FOB IL.
Electronics Forum | Fri Feb 27 11:22:46 EST 2004 | pjc
Contact Insertech N.E. Inc. at 978-433-3116. They are a used equipment supplier up in MA. I was in their shop recently and saw two wave exit conveyors- flat belt.
Electronics Forum | Mon Oct 06 18:24:34 EDT 2003 | pjc
what type of belt is it and what material is it? round belt, flat belt, etc... if its from a PCB transport conveyor or other PCB handling system, I recommend you contact the OEM. I have spliced belts before- rubber round belt off old Fuji loader and
Electronics Forum | Tue Oct 07 12:40:57 EDT 2003 | ssnow
OEM no longer in existence. hard to find exact match. belt is flat and green. used for PCB transport.
Electronics Forum | Tue Dec 16 16:14:20 EST 2003 | Bill
We are in need of a replacement conveyor belt for an unload-end conveyor(post wave solder). The part number we had at one point (formerly PCT automation) was 65-4008-4 (Belt, Flat-W=23.75 L=171.70) green high temp conveyor belt. Any help would be g
Electronics Forum | Fri Dec 30 05:53:32 EST 2005 | JOE
magazine unloader, flat belt conveyor, or a box with some foam inside of it.
Electronics Forum | Fri May 21 09:04:24 EDT 2004 | Cal
Rob- Is it safe to asume this is a flat belt conveyor? or an edge belt? I can talk to your contact if need be. thanks cal
Electronics Forum | Thu Jul 22 07:30:21 EDT 2010 | nitronica1
does anyone know where I can get replacement conveyor/drive belts for a Fuji/astro pcb 0.5m conveyor? pref from the UK or europe the length of the belts are approx 630mm and 6mm wide, flat with bumps on bottom side
Electronics Forum | Tue Apr 25 13:05:08 EDT 2006 | Hoss
TMC, Are you interested in this approach because you only have a flat belt conveyor and want to keep the components from being moved by the belt on the second pass? If so, you might try adding some stiffeners to the board edges to stand the board o
winsouce.jpg)
