Electronics Forum | Mon Mar 08 17:34:10 EST 2004 | pdeuel
Differant machines have differant types of control. smoe use pulse motors with encoders and are controlled by PMD pulse motor drivers. Most of these will have parameters to determine things such as fast over shoot, speed for certian tools and varati
Electronics Forum | Thu Aug 12 12:50:14 EDT 2021 | jamesatqkits
Hi Bukas, Err 22 shows up on the Panasonic motor driver in the back. I purchased this machine used. I have never had it operating in my shop. I checked the output of the transformer, 110 V output is 97 220 is 197, so I checked my input its 200 (machi
Electronics Forum | Sat Jun 22 05:40:36 EDT 2013 | lkavan
Hi friends, I am sorry that I boring you again, but I hope somebody can help me... I have a problem with servodrivers Panasonic MSD5A3P1EA in my Tenryu MT5530. Some servo loops are unstable, motor is shaking. It is problem with driver, when I change
Electronics Forum | Wed May 19 09:32:28 EDT 2004 | Mr Fix it - MPM
Sounds to me like the driver for the tactile is not working. The tactile has three components to it. The first is the switch, the second is the pneumatic up/down actuator and the third is a small motor in the tactile assembly. The motor has a driv
Electronics Forum | Thu Aug 12 15:39:36 EDT 2021 | bukas
it can be cable. can you swap cables with next driver? also swap cables on head. if same driver shows error you need new driver probably. if new driver shows error then its cables or motor. check documentation to see what motor it drives. you cant sw
Electronics Forum | Wed Dec 06 09:04:12 EST 2017 | dekhead
If you swapped in a different motor and had identical result then it isn't the motor. Suggest looking at driver or controller.
Electronics Forum | Tue Dec 05 02:15:12 EST 2017 | bukas
is that the only motor with that function or there are others? if you have more than one motor try switching cables and/or drivers and see what happens. this kind of behavior can also be caused by stepper driver.
Electronics Forum | Wed Sep 30 20:53:27 EDT 2020 | emeto
Motor and motor driver are involved in the equation as well.
Electronics Forum | Mon Feb 22 10:19:57 EST 2010 | swag
Check/reseat all connections on axis driver card and from driver card to step motor. On older MpM's it is common to get a bad connection on the connector for axis driver power and blow components on your driver board. Reseating these connectors mig
Electronics Forum | Fri Mar 08 05:44:40 EST 2019 | bukas
are you sure #1 and #6 are interchangeable? if I remember correctly there is a catch with those motors, like there are 2 groups, group 1 being #1 #3 #5 and group 2 being #2 #4 and #6. maybe try getting it back and swapping cables at drivers for head
