Electronics Forum | Thu Apr 22 11:11:44 EDT 1999 | Jimmy Strain
| To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | Thankyou. | What size? An 8x4 is going to index a lot more times than 32x
Electronics Forum | Fri Apr 23 00:50:06 EDT 1999 | KEVIN SIMPSON
| | To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | | | Thankyou. | | | What size? An 8x4 is going to index a lot more time
Electronics Forum | Thu Apr 22 05:16:44 EDT 1999 | Ross Clunie
To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. Thankyou.
Electronics Forum | Mon Mar 12 18:14:44 EST 2001 | reconsales
We stock over 3000 used Panasert feeders and have many parts in stock. We can also repair / calibrate your feeders with our PFA factory alignment fixture. Please provide us with an accurate description of the parts you need. Give an accurate descri
Electronics Forum | Thu Sep 14 21:39:18 EDT 2000 | Rick Flayler
I'm trying to locate and purchase one or two Panasonic lines configured as follows: MV2F (LL) or (XL) size. Prefer "K" style with feeders. MPA-V (XL) size. Rick Flayler- Fastek www.fastek-smt.com
Electronics Forum | Tue May 03 15:19:12 EDT 2005 | cuculi54986@yahoo.com
Thanks for the suggestions. We have been going around the dome to pick from the base. The placement machines are Panasonic chipshooters - MV2VB and MV2C. I have several problems with the MV2C. The K-type feeder plates were moved by my predeces
Electronics Forum | Thu Sep 11 21:41:16 EDT 2003 | raf
I need to know if MV2F K type feeders fit on a MV2VB K type machine. thank you in advance, Raf
Electronics Forum | Fri Sep 12 09:21:59 EDT 2003 | Gabriele
Yes for sure you can use MV2F feeder on MV2VB, the only difference is MV2VB feeder have better design (more robust)then MV2-F type. For sure you have to take care do not mix "K" type with "Q" type feeders who are not compatible among them. Ciao.....
Electronics Forum | Thu Sep 17 17:21:55 EDT 1998 | aa
| I am thinking of purchasing a Panasonic MV series chipshooter. If you own a Panasonic MV machine I would like to hear what you like and dislike about it. Is the service good? Are spare parts readily availiable? Does Panasonic support and follow up
Electronics Forum | Mon Jan 08 17:46:38 EST 2001 | Mark Krmpotich
Panasonics are good machines as long as you do the proper and timely PM's they recommend. Plus with my past history and from others that I here, their feeders are some of their biggest down fall. That's typically why they have to introduce new style
