Electronics Forum | Mon Apr 19 01:36:55 EDT 2010 | jola
Been a while since I used those machines but I found a list on how it was on ours anyway: MV2-F,C: F8-F1-F7-SHIFT-M-V MPA-V: F8-F1-F7-SHIFT-M-P-SHIFT-A-SHIFT-V MPA-G1: F8-F4-F7-SHIFT-M-F7-P-F7-SHIFT-A-F7 Always start from the main "run" screen. Go
Electronics Forum | Fri Mar 11 16:21:23 EST 2005 | George
What "initial settings" need to be turned on for Panasonic MV2F to start sending data to the data port? Thanx
Electronics Forum | Fri Sep 01 10:12:04 EDT 2000 | Anderson L. R. S�
We get problem with our PANADAC 945A-D board of MV2F machine and and we are trying to find some company that have the same board to replace it or fix it with urgency. Please, contact me by e-mail: anderson.sa@edb.ericsson.se Thanks!
Electronics Forum | Wed Mar 08 23:40:43 EST 2006 | fastek
If......... 1) Assuming you are panelizing them (you would have to actually).... 2) You don't have any fine pitch parts on the board then I would suggest a chipshooter like a Fuji CP-6 or a Panasonic MV2F. Get (2) of these used for around $100K ea
Electronics Forum | Mon Mar 05 15:56:21 EST 2007 | jasont
NM-2858 is European style M size MV2F. NM-2859 is European style XL size MV2F. MV2F is manufactured rated at 0.1sec per placement however, I have only seen them acheive around 20-25,000 cph I have x2 MV2F-XL "Q" in stock (NM-2559MB) w/feeders. IF
Electronics Forum | Thu Mar 01 22:59:30 EST 2001 | Cosine Theta
I am surprise that you get 99.5% pick-up rate out from the HS-50, unless you are refering to 0201 chip size. I can easily get 99.8% for 0603 and 99.6% for 0402 out from a Panasonic MV2F, and these machines have no adaptive pick-up. To get 99.8% from
Electronics Forum | Thu Mar 01 23:02:27 EST 2001 | Cosine Theta
You can easily get 99.8% for 0603 and 99.6% for 0402 out from a Panasonic MV2F, and these machines have no adaptive pick-up. To get 99.8% from HS-50 for 0603 or 0402 should be piece of cake. Anyway, is getting 99.8% pick-up = 6 sigma process?
Electronics Forum | Wed Jun 17 12:33:35 EDT 1998 | Michael
Does anyone know how many 8mm feeder positions the Panasonic MV2F SimmBlaster can hold. I read an article saying 30/30 split carriage, and another article saying 75/75. This info. was taken from "U.S. Tech", and the January edition of Circuits Assemb
Electronics Forum | Mon Mar 05 15:59:39 EST 2007 | jasont
Have you considered used equipment? We have several options you may want to consider; - 1999 MPM UP 2000/A HiE + 2003 UIC HSP 4797L + 1999 UIC GSM2 - 1997 Panasonic SPPV + 1997 or 2000 Panasonic MV2F + 1996 MPA-3F - 1998 Dek 265 GSX + 2001 Siemen
Electronics Forum | Fri Mar 24 15:20:27 EST 2000 | Chris McDonald
I have recently purchased a Tape and reel machine from V-Tech. We are using Presure Sensitive tape and we are not geting good results. Anything bigger that a SOIC14/16 gives us trouble. The cover tape will pull off on the feeder and we will lose part
