Electronics Forum | Mon Aug 18 15:03:38 EDT 2008 | awegener
I'd like to get more information about pick and place nozzles. How can I learn more? ... What do the nozzles look like? Are there different shapes? Are custom nozzles sometimes used for custom parts or are the nozzles mostly standardized? What kind
Electronics Forum | Sat Feb 11 09:58:20 EST 2012 | cbeneat
I have a question for any Panasonic CM 402/602 users. We run Cree XPE/XPG/XPC LED's on our machines, and have struggled for years with the lights sticking in our nozzles. We have two types, I believe both designed by Cree, one picks the light up by
Electronics Forum | Tue Jul 21 06:59:53 EDT 1998 | WAYNE
| Panasonic Create: What (Where) are your pad design and design quidelines that you have in-place? Dave F Dave" Thanks for the response. Many people I have talked with are interested in 201's, but are not placing at this time. I am curious about
Electronics Forum | Mon Feb 25 17:07:15 EST 2002 | peterson
We are using a Panasonic MPAV2 to place some QFP's. Can someone please help me with a problem we are having with coplanarity! The machine is "dropping" parts due to coplanarity issues. What settings should we be looking at in order to eliminate the
Electronics Forum | Thu Mar 14 17:28:35 EST 2002 | stepheno
I worked with Fuji CP6 where one of the techs wanted a minimum of part data's. He was used to working with panasonic machines. We would get resistors broken in two if the part data was too small and parts flying off the board if the part data was t
Electronics Forum | Fri Mar 02 16:06:36 EST 2007 | peterson
Mydata machines are very solid. They are always upgradable since the base machine is essentially the same. Recent advancements in camera and feeders have increase placement speed. However, this is generally not the machine you would select and expect
Electronics Forum | Mon Feb 13 09:34:45 EST 2012 | pr
I am new to the company but the story sounds the same. We have a new board coming in (with CREE LEDS) and I wanted to get in front of it, and found these nozzles. We are going to try them out as soon as we get the spending O.K. They are designed for
Electronics Forum | Tue Aug 21 06:26:26 EDT 2012 | headlad
I've had a CM202DHU since new (10 years) and it is a very reliable piece of kit. I wouldn't be happy placing 0201's but if you use 110 nozzles it is capable. Just make sure that you always line up the feeders prior to running or all you'll here is mi
Electronics Forum | Wed Sep 18 15:41:59 EDT 2013 | cbeneat
For 0402's, if the operator is paying attention, our equipment Panasonic CM 402/602/NPM's run at about .001%. Again this is dependent on an operator that pays attention to the fail rate. We usually don't have too many problems with 0402's, LED's ar
Electronics Forum | Sat Apr 28 21:13:11 EDT 2018 | stephenj37824
So lots of quotes and research later we have eliminated a few added a few to our choices lol. So it looks like we will be doing a decent volume now (due to our other board supplier letting us down as well). Roughly 4-5 million leds/connectors per mon
