Electronics Forum | Tue Jan 08 16:12:57 EST 2019 | cbeneat
We are using material control, and our auto support pins are from Quik Tool. They integrated there modules into our machines, we're happy with it. Not using auto changeover as far as I know, I stick to the maintenance side. We have a programmer that
Electronics Forum | Mon May 16 17:47:53 EDT 2022 | proceng1
Also, be sure that the board support is good. If you have any area of the board with less support, and it bounces a little when placing the LED, it may seem like it's randomly not placing correctly, and so any Z-depth or blow-off tweaking you do wil
Electronics Forum | Mon Aug 18 22:55:05 EDT 2008 | kpm135
Nozzles are really machine specific. Your best bet, if you're looking for the correct nozzle for a part, would probably be to send a strip of parts and the data sheet to the manufacture of the machine and ask them for their recommendation. Most machi
Electronics Forum | Mon Aug 01 18:33:21 EDT 2005 | crishan
Hi All, We are not using a Vib. bowl feeder, or stick feeder, these parts are on a reel. The pick & place machine we are using is a Panasonic brand YV100X, its a single head with 8 nozzles. What we are finding is that the component package size is
Electronics Forum | Mon Jul 06 23:34:30 EDT 1998 | Alan Archer
There is another company by the name of Count on Tools based in Gainesville, GA. Services include: *Diamond Nozzles standard type and special sizes *Adhesive nozzle rework and special design *MPA chuck head parts, rework and calibration *Vacuum pump
Electronics Forum | Tue May 03 15:19:12 EDT 2005 | cuculi54986@yahoo.com
Thanks for the suggestions. We have been going around the dome to pick from the base. The placement machines are Panasonic chipshooters - MV2VB and MV2C. I have several problems with the MV2C. The K-type feeder plates were moved by my predeces
Electronics Forum | Thu Aug 07 10:19:46 EDT 2008 | ratsalad
I will second the recommendation for Count On Tools. I've shipped sample parts out to them next day air (let's say on Monday), Tuesday they received the parts, made the nozzle, and shipped it back for Wednesday delivery. That is not normal turn tim
Electronics Forum | Thu Dec 14 21:10:42 EST 2000 | Jeff
elfego, i used to wwork at a place with the following line layout: * Loader * MPM Hi-E * Triscan Solder Inspection Machine (affectionately called the "Trashcan" by the technicians ;-) * 2 Phillips FCM fast chip mounters * 1 Phillips Topaz "hybrid" (
Electronics Forum | Thu Mar 03 12:55:31 EST 2005 | dru_wells
We seek the following. Any referrals would be appreciated. Responsible for the complete development of unique feeders that present custom metal stampings and connector products for pickup by industry standard placement machines. The parts will be i
Electronics Forum | Wed Mar 21 11:52:56 EDT 2007 | slthomas
Mark, the only Panasonics I've worked with were MSHIIs and an MPAV2B and at this point I'm foggy on both, but both tracked component inspection errors quite well. You should be able to tell how many parts are rejected for thickness inspection errors
