Electronics Forum | Tue Mar 13 07:56:19 EDT 2007 | Cmiller
Since you got no reply, I will give it my best shot but we do not have a radial inserter because they are really expensive. I would start with Universal instruments. I think its http://www.uic.com. I think they still make them in New York. TDK and Pa
Electronics Forum | Fri Nov 21 13:14:21 EST 2003 | pjc
Panasonic is another supplier of automatic radial lead insertion machines. Go to: http://www.panasonicfa.com/cgi-bin/product.cgi?prodline=electronics%20assembly&category=Pin%20Through-Hole∏id=rh5 www.panasonicfa.com
Electronics Forum | Wed Feb 01 10:53:56 EST 2006 | edruppert
AMS, Are you aware that you will have to purchase several types of insertion equipment for different part types? You will need an axial inserter, radaial and DIP inserter to cover the gamut of thru-hole insertion. Even then you may not cover oddba
Electronics Forum | Sun Jun 16 15:14:55 EDT 2013 | mbb
Hello, We are using Panasonic as pick and place Machine with joint detection mechanism. Operators are spending so much time in splicing operations. I would like to know if there is any tool or machine to do automatically splicing (with less time spen
Electronics Forum | Mon Aug 08 07:12:07 EDT 2005 | pci
yes there are. main mfrs of axial inserters are panasonic,samsung,tdk,universal.... in some of the cases u need to have a axial sequencer too, which are used to sequence the axial componnets prior to the insertion.
Electronics Forum | Thu May 21 22:17:32 EDT 1998 | PETROCHEMICAL, INC.
WE HAVE FOR SALE. PRINTER PANASONIC MODEL NM 2670A YEAR 1.993 HOURS 1000 " FULLY AUTOMATIC " CONDITION - GOOD - WORKING. THE EQUIPMENT IS IN MIAMI USA. AVAILABLE IMMEDIATELLY
Electronics Forum | Fri Jun 25 09:51:24 EDT 2004 | Robert Ressler
Michael - Hello, you may also want to consider Panasonic JV - jumper (variable insertion pitch) - excellet machine AX - axial (fixed 5mm insertion pitch) - excellent machine AV - axial (variable insertion pitch) - fair machine RH - radial (various
Electronics Forum | Tue Apr 08 09:56:58 EDT 2008 | slthomas
Is it a factory (Universal, Panasonic, etc.) holder or aftermarket? We used to use Fancort holders on our Universals and they're definitely still around.
Electronics Forum | Fri Jul 07 17:05:38 EDT 2017 | tombstonesmt
Not sure if Panasonic supports PanaPro anymore. If it was PCB programming I could help, but I've never worked on an insertion machine.
Electronics Forum | Sun Nov 24 12:44:10 EST 2019 | bane016
I have problem with feeder cart.I have no voltage on any of the 17 feeder connectors, and when i insert the cart in the machine i get the message that the cart is not connected. I have a voltage to one separate connector normally.
