Electronics Forum | Fri Mar 24 15:20:27 EST 2000 | Chris McDonald
I have recently purchased a Tape and reel machine from V-Tech. We are using Presure Sensitive tape and we are not geting good results. Anything bigger that a SOIC14/16 gives us trouble. The cover tape will pull off on the feeder and we will lose part
Electronics Forum | Thu Apr 22 11:11:44 EDT 1999 | Jimmy Strain
| To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | Thankyou. | What size? An 8x4 is going to index a lot more times than 32x
Electronics Forum | Fri Apr 23 00:50:06 EDT 1999 | KEVIN SIMPSON
| | To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | | | Thankyou. | | | What size? An 8x4 is going to index a lot more time
Electronics Forum | Tue Sep 17 05:19:48 EDT 2013 | engineering@smtxtra.com
Hello, its simple the Panasonic tape is encoded, the non original splice tape you try to replace is not coded hence error on feeder sensor. we offer Panasonic replacement splice tape, for a sample please contact the office, hope this helps Robi SmtXt
Electronics Forum | Sun May 05 10:36:08 EDT 2013 | mbb
Hello, We are using Panasonic pick and place machine. I would ask if there is anyone from Panasonic to tell us which is the tape splicing method the most adequate to Panasonic feeders?
Electronics Forum | Thu Jul 15 13:41:23 EDT 2004 | Claude_Couture
We use paper tape in green emboss feeder without problems. But you can't use emboss tape in white paper feeder because the bottom of the tape needs a channel so the tape is supported on two side. Also, we remove all push pins. they are useless. We ne
Electronics Forum | Mon Jul 12 17:32:53 EDT 2004 | Petros
Can anyone tell me if the Panasonic K-style green emboss 08x04 feeders can be used interchangably with the white paper ones? If so what is the importance of the push pin and are there settings in the machine that need to be changed? Also is this (whi
Electronics Forum | Wed May 08 09:49:17 EDT 2002 | Hussman69
Hello, We are experiencing a little problem of cutting feeder tape. When ever we place two or more 24 mm feeders together, the cutter on the machine will partialy cut the adjoining tape, or pull it out of sequence. The machine is a Panasonic MSR,
Electronics Forum | Wed Aug 02 17:19:49 EDT 2006 | flipit
Yes 0402 8X4 embossed feeders exist for Panasonic MSR, Universal GSM, Contact Systems, and Mimot for sure. In the old days of 0402 components, 0402 resistors used to come in 8X4 paper tape but now I think most 0402 resistors and capacitors come in 8
Electronics Forum | Wed Jul 14 17:33:04 EDT 2004 | Ross Clunie
The short answer is "No" the white and green feeders are not interchangble. The green feeder has a channel in it to allow the "embosed" or plastic tape to fit flat at the pickup position. If you use paper tape in this type of feeder the tape can be d
