Electronics Forum | Tue Mar 02 12:50:12 EST 2021 | ttheis
I have a parts 265 horizon if you want it. Was told it needs a front rail sensor but lmk if you are interested. Will sell cheap, located in milwaukee area.
Electronics Forum | Tue Mar 17 16:56:45 EDT 2009 | gregf912
Sorry Keith but is not possible to place 0201 parts on the CP43 machine. THe XY table is not tight enough on the resolution or the Z height. The parts camera will not be able to tell the part from the nozzle. THe CP6-4000 machine can not do 0201 part
Electronics Forum | Fri Dec 18 22:20:41 EST 1998 | phillip hunter
| I have developing a BGA Process and having problems with | 310 IO PBGA reflowing. I am achieving good wetting exept | 2 to 5 balls on the outer perimeter I have a good profile | my air flow is set per mfg spec, the stange thing is that | it doe
Electronics Forum | Sun Dec 20 20:40:22 EST 1998 | Miguel Mariscal
I would love to send a copy of my profile thanks, our machine is also a Summit 2000. | | I have developing a BGA Process and having problems with | | 310 IO PBGA reflowing. I am achieving good wetting exept | | 2 to 5 balls on the outer perimeter
Electronics Forum | Tue Oct 10 11:06:04 EDT 2006 | lheiss
Hi All, I wasn't sure how this would turn out until I ran some production. As I suspected, after every nozzle change the machine dumps the first 3 pickups, checks the nozzle height again (function 30?) and then begins placing with correction with n
Electronics Forum | Mon Mar 06 11:13:08 EST 2006 | fredericksr
I ran this same process by MyData when I was there for training and I received the message that calibrating the force sensor through the service menu was an invalid technique. Correct me if I am wrong, but every tool should recalibrate itself when i
Electronics Forum | Tue May 31 01:52:39 EDT 2016 | rstsg
Hi experts, I am new to board design, and have some question please guide me, I have a hardware design Idea, which needed 2 connect a sensor with an MCU, so i have 2 PCBs (both evm) 1:- How should i start to make a single PCB using both (removing few
Electronics Forum | Tue May 03 19:52:09 EDT 2016 | ttheis
OK, I forgot to import the new order into the task block builder but that didn't resolve the issue. I decided to reduce the height of the part in the definition from 510 mils (which it is) to 450 mils and it places without a problem. Its strange bec
Electronics Forum | Tue Jan 30 10:43:18 EST 2007 | darburch
Before you do anything to the windmills check the heights in your PD's and if you are using board supports be certain that they are set correctly. The CP 65 has approx 1.8mm of travel before the pin will get stuck, as the nozzle should only deflect .
Electronics Forum | Tue Aug 06 19:22:15 EDT 2024 | jdengler
Poly, I don't know the UIC GX11 but on other machines I would first look at component height in the program. If it is not in the paste you may have the part height set too high which means you are dropping it onto the past not pushing it into the p
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723