Electronics Forum | Tue Aug 04 10:19:38 EDT 2009 | swag
Here's a few ideas: If it has one, make sure the flexible coupler set screws are tight. Replace the tactile switch (often these appear to work fine in I/O but do not work properly in production). Clean and oil the tactile plunger if it has one. M
Electronics Forum | Fri Jun 24 04:51:38 EDT 2016 | unix60959
Hello, Does anyone know where I can find any information or documentation on the miniwave height sensor and control. I feel like the company I'm working for is possibly using the machine incorrectly in this regard. I assume, but would like to verify
Electronics Forum | Thu Apr 20 17:26:15 EDT 2006 | russ
Well i wouldn't run every board then!!!! okay seriously, All bad parts off the same each time or are they "all over the place" Check your mount height, you may have sagging or warped boards or just bad part height
Electronics Forum | Wed Mar 31 10:08:13 EDT 2010 | leemeyer
First I would only be concerned about the front panel led's if the transport is not clamping. These LED's are most likeley burnt out. If the transport clamps your sensors are working properly. If you are seeing a "Place 1 Z" on the handheld it is ask
Electronics Forum | Mon Nov 09 11:56:59 EST 1998 | Stefan W.
At least I can imagine what happens and it may solve your problem. If the vacuum is already turned on above the component there will be an airstream above and around the component. This might even suck the air out of the cavity, which supports the co
Electronics Forum | Fri Dec 16 10:13:33 EST 2011 | rapid
About the automated printing machines: They are all a little different, but the alignment part of the process is basically the same. I don't know if you have ever seen an automatic printer, so I'll do my best to explain it. The PCB rides into the
Electronics Forum | Mon Jul 18 21:36:18 EDT 2022 | ttheis
We have two GSM machines (4-spindle, single beam) and had a camera fail on one machine. We decided to clean and calibrate the cameras on both machines. One machine we had no problems and all is working properly. The other machine will not pick up the
Electronics Forum | Tue Oct 26 14:54:06 EDT 2010 | jtimmons
Looking for a proximity Sensor Panadac 918-18-1. Does anyone know of a source?
Electronics Forum | Thu Sep 08 15:45:21 EDT 2016 | claudea2
Thanks Bob, I will change the z-rod just to make sure. It is a tall part read at 180. The nozzle height bugs me because we have 3 machines and the first one has a nozzle height of 238 while the 2 others around 200. I am thinking this parameter may ad
Electronics Forum | Tue Jul 05 17:09:40 EDT 2022 | madisreivik
PROBLEM SOLVED :) ! I messed with parameters, then started to check hardware again. and.... There are 2 transport position on the carrier 1) vacuum 2) mech clamp Both have fiber position sensor which shows the status When there is component, the
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723